Genuine Toyota T100 A/C Accumulator
AccumulatorEnter your vehicle info to find more parts and verify fitment
- Select Vehicle by VIN
- Select Vehicle by Model
Select by VIN
orEnter your VIN for the most accurate results.Enter your VIN for the most accurate results.
Select by Model
-- Select Make --
-- Select Model --
-- Select Year --
2 A/C Accumulators found
Toyota T100 Tank, Receiver Air Conditioner
Part Number: 88471-34010- Other Name: Dehydrator, Drier, Tank
- Manufacturer Note: DEALER OPT
$33.17 MSRP: $46.36You Save: $13.19 (29%)
Toyota T100 Tank, Receiver Air Conditioner
Part Number: 88471-20050- Other Name: Dehydrator, Drier, Receiver
- Replaces: 88471-04020, 88471-06020
$54.92 MSRP: $76.77You Save: $21.85 (29%)
Toyota T100 A/C Accumulator Parts Questions & Answers
- Q: How to remove and install a receiver/drier in an air conditioning system on Toyota T100,1995 through 2004 Toyota Tacoma and 1996 through 2002 Toyota 4Runner?A: Have the refrigerant discharged and recovered by an air conditioning technician. Remove the grille. Disconnect the refrigerant lines from the A/C accumulator and cap the open fittings to prevent entry of moisture. After the system has been discharged, detach the refrigerant lines from the top of the A/C accumulator and cap them. To access the back-up nuts on the A/C accumulator, remove the Coolant Reservoir and locate the bracket with the mounting nuts. Loosen the pinch bolt or bracket mounting bolts, whichever is easier to get a wrench on, and remove the A/C accumulator. Installation is the reverse of removal. Have the system evacuated, charged and leak tested by the shop that discharged it. If the A/C accumulator was replaced, have them add about 0.34 ounces of refrigerant oil to the system. Use only the refrigerant oil compatible with the refrigerant of your system (R-134a).
