Parts for:

 
  Cart: 0 item

Customer Support:  Customer Service - Live Chat Live Chat or Customer Service - Phone 1-888-905-9199

Toyota Yaris TRD Performance

12 TRD Performance founded. Select your vehicle to refine your results.

  • Discontinued
    • Intake tube works with existing MAF sensor and features smooth, contoured shape that increases cylinder filling, ensuring proper air/fuel ratio for smooth response and drivability.
    • Features reusable high-flow, low restriction conical air filter that can be cleaned and reused for the life of the vehicle including filter restriction gauge lets owners know when to clean the filter.
    • Dyno-tested to deliver an increase in both horsepower and torque for superior acceleration and greater pulling power.
    • Peak to peak power gain is +11hp @ 4,850 rpm and +19.0 lb.-ft. torque at 3,600 rpm; largest power gain is +15 @ 3,150 rpm and +25 lb.-ft. torque @ 3,150 rpm (as tested on 06MY Tacoma.)
    • For race applications only, not emissions legal or warranted
    Attribute
    EMISSIONS LEGAL:No
    TRD:TRD
  • $181.26 $229.00

    You Save: $47.74

    Add to Cart
    • Enhances on-road vehicle performance—quicker turn-in, enhanced steering response and improved cornering.
    • Features TRD-developed proprietary spring rate (linear in front, progressive in rear).
    • Lowers vehicle’s center of gravity by 0.5” in front and 1.5” in rear.
    • Rigorously tested through the slalom, on the skid pad and around a high-speed road course.
    • Engineered to ensure against rattling, clunking or rubbing—even when pushed to the limit.
    • Designed to work with stock struts.
    Attribute
    POSITION:Front and Rear
    QUANTITY:4
    TRD:TRD
  • $44.46 $57.00

    You Save: $12.54

    Add to Cart
    • Forged, highly polished billet aluminum oil cap provides high-tech, race-ready appearance
    • High-luster coating ensures long-term appearance
    • Threaded screw-in mounting
    • Direct replacement for stock oil cap
    Attribute
    LOGO:TRD
    MATERIAL:Forged Billet Aluminum
    TRD:TRD
    TYPE:Screw-on
  • $36.48 $45.00

    You Save: $8.52

    Add to Cart
    • Forged, highly polished billet aluminum oil cap provides high-tech, race-ready appearance
    • High-luster coating helps ensure long-term appearance
    • Threaded screw-in mounting
    • Direct replacement for stock oil cap
    Replaced by: PTR35-00110
    Attribute
    FINISH:Forged
    LOGO:TRD
    MATERIAL:Forged Billet Aluminum
    TRD:TRD
    TYPE:Screw-on
  • $10.26 $15.00

    You Save: $4.74

    Add to Cart
    • All TRD oil filters feature a rugged, perforated steel inner core to help prevent element collapse under worst-case scenarios
    • Heavy duty pressure relief valve helps improve oil flow during cold starts
    • High-temperature rated silicone anti-drain back valve helps retain oil in the filter to help avoid dry starts
    • Ported and polished back plate provides smooth oil inlet holes to help reduce oil restriction
    Attribute
    TRD:TRD
  • $62.70 $79.00

    You Save: $16.30

    Add to Cart
    • For optimal engine protection and performance, the TRD performance air filter offers superb filtration and enhanced airflow
    • Four-ply filter element features durable, epoxy-coated mesh enclosure and elastomeric seal to help optimize a precise, leak-free fit
    • Washable and reusable, regular cleaning ensures free airflow and top performance
    • Designed to last the lifetime of the vehicle
    • Pre-oiled and ready to install, offers exact drop-in replacement for stock air filter
  • $427.50 $500.00

    You Save: $72.50

    Add to Cart
    • High-strength shocks and struts use more aggressive valave to reduce body roll
    • Sport-tuned specifically for the vehicle
    • Blue components feature TRD logo in white
    • Enhanced overall response and cornering performance
    • Provides a firm, well-managed ride without excessive harshness
    • TRD suspension components are designed based on the engineering that created the vehicle in the first place, in contrast to aftermarket manufacturers
    • Maintains high factory quality standards for fit and durability
    Attribute Instructions
    COLOR:BLUE
    LOGO:TRD
    POSITION:Front and Rear
    QUANTITY:4
    SET:Set
    TRD:TRD
  • $29.98 $37.56

    You Save: $7.58

    Add to Cart
    • Helps enhance vehicle performance in high-rpm or high-load conditions
    • Designed to release at higher cooling system pressures than factory caps, raising the coolant boiling point to protect engines under high-rpm or high-load operation 
    Attribute
    LOGO:TRD
    PRESSURE RATING:18.5 psi
    TRD:TRD
    TYPE:N Type
  • $302.10 $399.00

    You Save: $96.90

    Add to Cart
    • Polished muffler body that’s exclusively built from 304 stainless steel, specifically for the Yaris and delivering a measurable boost in vehicle horsepower as well as a more resonant engine sound.
    • TRD logo etched on both sides of the high-polished oval exhaust tip.
    • Uses OEM connectors and existing flanges/gaskets.
    • Crafted with precision-welds for a jewel-like appearance.
    • High-quality TRD accessory that’s race-tested with proven quality.
    • Uses factory connector flanges and gaskets (in most applications), and reuses factory hardware and hangers for easy, professional no-drill, no-cut installation.
    • Maintains Toyota’s high quality standards for performance and strength.
    Replaced by: PTR03-52080
    Attribute
    EMISSIONS LEGAL:Yes
    FINISH:Polished
    LOGO:TRD
    MATERIAL:Stainless Steel
    OUTLET:Single
    TRD:TRD
  • $302.10 $399.00

    You Save: $96.90

    Add to Cart
    • Polished muffler body that’s exclusively built from 304 stainless steel, specifically for the Yaris and delivering a measurable boost in vehicle horsepower as well as a more resonant engine sound.
    • TRD logo etched on both sides of the high-polished oval exhaust tip.
    • Uses OEM connectors and existing flanges/gaskets.
    • Crafted with precision-welds for a jewel-like appearance.
    • High-quality TRD accessory that’s race-tested with proven quality.
    • Uses factory connector flanges and gaskets (in most applications), and reuses factory hardware and hangers for easy, professional no-drill, no-cut installation.
    • Maintains Toyota’s high quality standards for performance and strength.
    Attribute
    EMISSIONS LEGAL:Yes
    FINISH:Polished
    LOGO:TRD
    MATERIAL:Stainless Steel
    TRD:TRD
1-10 of 12 Results < Prev 1 2 Next >
 
Item has been added to your cart!

Part No.:

Qty.

Price: $0.00

Subtotal: $0.00

This part contains hazardous material.

This part is a packaged part and contains multiple quantities of: (Pack Qty: 4)

This part is a packaged part and contains multiple quantities of the same item. In an effort to simplify packaging Toyota will sometimes include multiple parts in a package.