Genuine Toyota Solara Fuel Tank

Toyota Solara Fuel Tank Parts Questions & Answers

• Tank Assy, Fuel
  77001-06110
  Q: What precautions should be taken when repairing the fuel tank or filler neck?

  A: The first thing, repairs to the fuel tank should be performed by a professional. Next, after cleaning the fuel system, fumes can remain and ignite while repairing the tank on your vehicle. The fuel tank should not be placed in a spot where open flames may ignite the fumes.
• Tank Assy, Fuel
  77001-06040
  Q: How to remove a fuel tank on 1997 through 2001 Toyota Avalon and 1997 through 2001 Toyota Solara?

  A: To remove the fuel tank, first, relieve the fuel system pressure and detach the battery cable. If the tank is full, siphon the fuel into an approved container. Raise the vehicle and remove the exhaust system from the center exhaust pipe to the rear. Disconnect the fuel lines, vapor return line, and fuel inlet pipe from the tank fittings. Support the tank with a floor jack and remove the retaining straps. Lower the tank enough to disconnect the electrical connector from the Fuel Pump/Fuel Level Sensor and remove the tank. To install, reverse the removal steps.
• Tank Assy, Fuel
  77001-06050
  Q: What are the safety precautions to take when repairing a fuel tank or filler neck of a Toyota Avalon and Toyota Solara?

  A: It is crucial to entrust fuel tank and filler neck repairs to experienced professionals due to the potentially dangerous nature of the work. Even after cleaning the fuel system, there is a risk of explosive fumes remaining, which can ignite during tank repairs. If the tank needs to be removed, it should never be placed near sparks or open flames. Extra caution is necessary for garages with gas-type appliances. Safety precautions must be followed meticulously to mitigate the risks of fuel tank repairs.
• Tank Assy, Fuel
  77001-06050
  Q: How to remove and install a fuel tank on 2002 through 2008 Toyota Solara and 2002 through 2006 Toyota Avalon?

  A: Relieve the fuel system pressure. Remove the fuel filler cap to relieve fuel tank pressure. Detach the cable from the negative terminal of the battery. If the tank is full or nearly full, siphon the fuel into an approved container using a siphoning kit. Warning: Do not start the siphoning action by mouth! Raise the vehicle and securely place it on jackstands. Completely remove the exhaust system from the center exhaust pipe to the rear of the vehicle. Disconnect the fuel lines, vapor return line, and fuel inlet pipe from the fuel tank fittings. Be sure to plug the hoses to prevent leakage and contamination of the fuel system. Remove the four fasteners securing the exhaust heat shield below the fuel tank. Support the fuel tank with a floor jack. Place a sturdy plank between the jack head and the fuel tank to protect the tank. Remove the bolts from the fuel tank retaining straps. Remove the tank from the vehicle. Installation is the reverse of removal.