Genuine Toyota Supra Wheel Seal

Toyota Supra Wheel Seal Parts Questions & Answers

• Ring, O
  90301-06196
  Q: How to remove and replace rear axle shafts and Wheel Seal for 1979 through 1981 Toyota Supra?

  A: To remove the axle shafts, the vehicle needs to be raised and supported on jack stands, with the front wheels blocked. The rear wheels, brake calipers, and discs should be removed, and the differential oil drained. The axle shaft and Wheel Seal should be inspected for wear or damage, and, the seal should be removed with a slide hammer puller and replaced using a seal driver or appropriately sized pipe and hammer. Before installing the axle shaft, multi-purpose grease should be applied. The contact surfaces of the axle housing and bearing retainer should be cleaned, and gasket sealant should be applied. The axle and bearing retainer should be attached to the axle housing, and after installation, the differential should be filled with the proper lubricant. Finally, the brakes should be bled and the wheel tightened with lug nuts.