Genuine Toyota Tacoma Automatic Transmission Filter

Toyota Tacoma Automatic Transmission Filter Parts Questions & Answers

• Strainer Assy, Valve Body Oil
  35330-60030
  Q: How to drain and replace transmission fluid and Filter on 2005 through 2009 Toyota Tacoma?

  A: Drain and replace transmission fluid after the engine cools. Buy the recommended fluid, a new filter, a floor jack, jackstands, a drain pan, newspapers, and rags. Raise the vehicle and place the drain pan under the transmission pan. Remove the drain plug, let the fluid drain, then reinstall the plug. Remove the pan rock shield and bolts. Tap the pan with a rubber mallet to break the gasket seal. Lower the pan and separate the dipstick tube parts. Drain remaining fluid. Remove the filter bolts and filter. Check the pan, filter, and fluid for damage. Clean the pan and remove old gasket material. Install new gaskets on the filter and reinstall it. Apply sealant to the pan and reinsert the filler tube. Attach the pan to the transmission case and tighten the bolts. Lower the vehicle, add 1-1/2 quarts of fluid, start the engine, and move the gear selector. Check the fluid level and add more if needed. For V6 models, check for leaks and recheck the fluid level when hot.
• Strainer Sub-Assy, Oil
  35303-30050
  Q: How to drain and replace transmission fluid and Filter at specified intervals on Toyota T100,Toyota 4Runner and 1995 through 2004 Toyota Tacoma?

  A: After the engine cools, purchase the correct transmission fluid and a new filter. You'll need a floor jack, jackstands, a drain pan, newspapers, and rags. Raise the vehicle and place the drain pan under the transmission. Remove the drain plug, let the fluid drain, then reinstall the plug. Remove the transmission pan and drain remaining fluid. Remove the filter. Inspect the pan, filter, and fluid. Clean the pan and remove old gasket. Install a new filter and gasket. Apply sealant to the pan and reinsert the filler tube. Reattach the pan. Lower the vehicle, add fluid, and run the engine. Move the gear selector through each range. Check the fluid level and add more if needed. Check for leaks and the fluid level when hot.