Make sure this part fits your vehicle

Scion 22030-0V010 Throttle Body Assembly W/Motor

2011-2016 Scion tC 220300V010

Toyota 22030-0V010 Throttle Body Assembly W/Motor
  • Part Description
    Body Assembly, Throttle W/Motor
  • Part Name Code
    22030
  • Replaces
    22030-36010
  • Manufacturer
    Toyota
Customer Questions & Answers
$285.72 MSRP: $409.69
You Save: $123.97 (31%)
1
ADD TO CART
Ships in 1 Business Day
  • Product Specifications

    BrandGenuine Scion
    Part Name Code22030
    Manufacturer Part Number22030-0V010
    Part DescriptionBody Assembly, Throttle W/Motor
    Other NamesThrottle Body
    Item Dimensions9.2 x 7.6 x 5.9 inches
    Item Weight2.90 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces22030-36010
    ManufacturerToyota
    SKU22030-0V010
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Trim & Engine Important vehicle option details
    2011-2016 Scion tC4 Cyl 2.5L2ARFE; 2ARFE; AGT20L-ALFGKA, AGT20L-ALFGKK, AGT20L-ALTGKA, AGT20L-ALTGKK

Customer Questions & Answers

Q:
I just want to confirm I'm purchasing a correct part before placing an order Posted by ToyotaPartsDeal Specialist
A:
You can Select Your Vehicle to check if 22030-0V010 fits your vehicle.
Posted by ToyotaPartsDeal Specialist
Q:
How to check and replace the throttle body in a Toyota Rav4? Posted by Customer
A:
Turn the ignition on. While listening near the throttle body, press and release the accelerator pedal. The throttle body motor should make noise, indicating operation. If excessive noise is heard, inspect the throttle body and replace as necessary. Connect a scan tool and monitor the throttle sensor position. Press the accelerator pedal to the floor and hold. The throttle sensor position values should be 60 percent or greater. If the value is less than 60 percent, inspect the throttle body and replace if necessary. Turn the ignition off and disconnect the throttle body connector. Using a digital volt-ohm meter (DVOM), measure resistance between pins 1 and 2 of the throttle body connector. Resistance should be 0.3 ohms to 100 ohms. Replacement: Disconnect the cable from the negative battery terminal. Remove the engine cover. Remove the intake duct and air filter cover. Remove the air filter housing with the MAF sensor and bracket. Clamp off the coolant hoses to the throttle body to minimize coolant loss. Remove the clamps and disconnect the two coolant hoses at the throttle body. Plug the coolant hoses to prevent coolant leakage. Remove the bolt for the fuel hose bracket. Disconnect the electrical connector from the throttle body. Remove the throttle body mounting bolts and remove the throttle body. Remove and discard the old throttle body gasket. Installation is the reverse of removal. Be sure to use a new gasket and tighten the throttle body mounting bolts. Check the coolant level, adding as necessary. Idle initialization: Ensure the battery is connected and the ignition is Off. Remove the EFI No. 1 fuse and ETCS fuses from the under hood junction box. Wait a minimum of 60 seconds after removing the fuses. Install the fuses after waiting a minimum of 60 seconds after removing the fuses. Turn the ignition switch to On (DO NOT start the engine) without depressing the accelerator pedal. Using a scan tool, clear any DTCs that are set. Start the engine and bring to operating temperature. Monitor idle speed at operating temperature. With AC and all accessories Off, idle speed should be 720 RPM to 820 RPM. Using the scan tool, monitor the throttle sensor position. Press the accelerator pedal to the floor and hold. The throttle sensor position values should be 60 percent or greater. Road test the vehicle and verify proper operation.
Posted by ToyotaPartsDeal Specialist
Q:
What parts of the 2018 Toyota Highlander should be avoided when cleaning with the solvent? Posted by Customer
A:
The Throttle Position (TP) sensor and the Idle Speed Control (ISC) valve should be avoided.
Posted by ToyotaPartsDeal Specialist
See expert answers on similar Throttle Body
Q:
Is there anything else to consider after installing the throttle body for the 2009 Toyota Camry? Posted by Customer
A:
After installation, check the coolant level and add more if necessary to bring it to the appropriate level.
Posted by ToyotaPartsDeal Specialist
See expert answers on similar Throttle Body
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Toyota Part 22030-0V010, the Right Choice

Your vehicle deserves only genuine OEM Toyota parts and accessories. To ensure reliability, purchase Toyota part # 22030-0V010 Throttle Body Assembly W/Motor. It is sometimes referred to as Scion Throttle Body. Our Toyota parts and accessories are expedited directly from authorized Toyota dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM Toyota parts are the best for restoring your vehicle to factory condition performance. This part fits 2011-2016 Scion tC.

Affordable, reliable and built to last, Toyota part # 220300V010 Throttle Body Assembly W/Motor stands out as the smart option. ToyotaPartsDeal.com is your prime online source with the biggest and best selection of genuine Toyota parts and accessories at giant discounted prices. We have the OEM Toyota parts and accessories you need at the wholesale prices. ToyotaPartsDeal.com has you covered no matter what type of Toyota vehicle you drive. For detailed Scion parts information, click here.

Why choose Toyota Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly