Toyota 85213-30270 Windshield Wiper Blade

You can Select Your Vehicle to check if 85213-30270 fits your vehicle.

The windshield wiper and blade assembly should be inspected periodically for damage, loose components and cracked or worn blade elements. Road film can build up on the wiper blades and affect their efficiency, so they should be washed regularly with a mild detergent solution. The action of the wiping mechanism can loosen bolts, nuts and fasteners, so they should be checked and tightened, as necessary, at the same time the wiper blades are checked. If the wiper blade elements are cracked, worn or warped, or no longer clean adequately, they should be replaced with new ones. For 1990 and earlier models, lift the arm assembly away from the glass for clearance and pull the top end of the rubber blade element in until the rubber blade is free of the end slot and you can see the replacement hole. Remove the rubber blade from the frame and discard it. To install a new rubber wiper element, insert the end with the small protrusions into the replacement hole and work the rubber along the slot in the blade frame. Once all the rubber is in the frame slot, allow it to expand and fill in the end. For 1991 and later models, detach the blade insert element and pull it out of the right end of the wiper frame. Insert the new element end with the small protrusions into the right side of the wiper frame. Slide the element fully into place, then sweat the protrusions in the end of the frames to secure.