Make sure this part fits your vehicle

Toyota 19101-75010 Cap Sub-Assy, Distributor

1993-1998 Toyota 1910175010

Toyota 19101-75010 Cap Sub-Assy, Distributor
  • Part Description
    Cap Sub-Assy, Distributor
  • Part Name Code
    19101
  • Manufacturer
    Toyota
Customer Questions & Answers
$62.80 MSRP: $88.52
You Save: $25.72 (30%)
1
ADD TO CART
Ships in 1-3 Business Days
  • Product Specifications

    BrandGenuine Toyota
    Part Name Code19101
    Manufacturer Part Number19101-75010
    Part DescriptionCap Sub-Assy, Distributor
    Other NamesCap
    Item Dimensions5.4 x 5.1 x 4.0 inches
    Item Weight0.80 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerToyota
    SKU19101-75010
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Trim & Engine Important vehicle option details
    1996-1997 Toyota 4RunnerSR5B|4 Cyl 2.7L3RZFE; 3RZFE; RZN180L-GKMSKA, RZN180L-GKPSKA, RZN185L-GKMSKA, RZN185L-GKPSKA
    1993-1998 Toyota T100STD|4 Cyl 2.7L3RZFE; 3RZFE; RCK10L-TRMRKA, RCK10L-TRSRKA
    1995-1998 Toyota TacomaDLX|4 Cyl 2.4L, 4 Cyl 2.7L2RZFE, 3RZFE; 2RZFE, 3RZFE; RZN140L-TRMDKAB, RZN140L-TRSDKAB, RZN150L-CRMDKAB, RZN150L-CRSDKAB, RZN161L-TRMDKAB, RZN161L-TRPDKAB, RZN171L-CRMDKAB, RZN171L-CRPDKAB

Customer Questions & Answers

Q:
Does it fit my car? Posted by ToyotaPartsDeal Specialist
A:
You can Select Your Vehicle to check if 19101-75010 fits your vehicle.
Posted by ToyotaPartsDeal Specialist
Q:
How Do You Check and Replace Spark Plug Wires, Distributor Cap and Distributor Rotor on Toyota 4Runner,Toyota T100 and Toyota Tacoma? Posted by Customer
A:
The spark plug wires should be checked whenever new spark plugs are installed. Begin this procedure by making a visual check of the spark plug wires while the engine is running. In a darkened garage, start the engine and observe each plug wire. If there is a break in the wire, you will see arcing or a small spark at the damaged area. If arcing is noticed, make a note to obtain new wires, then allow the engine to cool and check the distributor cap and rotor. The spark plug wires should be inspected one at a time to prevent mixing up the order. Each original plug wire should be numbered to help identify its location. Disconnect the plug wire from the spark plug, checking inside the boot for corrosion. Push the wire and boot back onto the end of the spark plug, ensuring a tight fit. Wipe the entire length of the wire to remove built-up dirt and grease, checking for burns, cracks, and other damage. Remove the rubber boot (if equipped) and disconnect the wire from the distributor, checking for corrosion and a tight fit. Inspect the remaining spark plug wires, making sure each one is securely fastened at the distributor and spark plug. If new spark plug wires are required, purchase a set for your specific engine model and remove and replace the wires one at a time. Detach the distributor cap (if equipped) and look inside for cracks, carbon tracks, and worn, burned, or loose contacts. Pull the rotor off the distributor shaft and examine it for cracks and carbon tracks. Replace the cap and rotor if any damage or defects are noted. It is common practice to install a new cap and rotor whenever new spark plug wires are installed, but if you wish to continue using the old cap, check the resistance between the spark plug wires and the cap first. When installing a new cap, remove the wires from the old cap one at a time and attach them to the new cap in the exact same location.
Posted by ToyotaPartsDeal Specialist
Q:
How Do You Check and Replace Spark Plug Wires, Distributor Cap and Distributor Rotor on Toyota 4Runner,Toyota T100 and Toyota Tacoma? Posted by Customer
A:
The spark plug wires should be checked whenever new spark plugs are installed. Begin this procedure by making a visual check of the spark plug wires while the engine is running. In a darkened garage, start the engine and observe each plug wire. If there is a break in the wire, you will see arcing or a small spark at the damaged area. If arcing is noticed, make a note to obtain new wires, then allow the engine to cool and check the distributor cap and rotor. The spark plug wires should be inspected one at a time to prevent mixing up the order. Each original plug wire should be numbered to help identify its location. Disconnect the plug wire from the spark plug, checking inside the boot for corrosion. Push the wire and boot back onto the end of the spark plug, ensuring a tight fit. Wipe the entire length of the wire to remove built-up dirt and grease, checking for burns, cracks, and other damage. Remove the rubber boot (if equipped) and disconnect the wire from the distributor, checking for corrosion and a tight fit. Inspect the remaining spark plug wires, making sure each one is securely fastened at the distributor and spark plug. If new spark plug wires are required, purchase a set for your specific engine model and remove and replace the wires one at a time. Detach the distributor cap (if equipped) and look inside for cracks, carbon tracks, and worn, burned, or loose contacts. Pull the rotor off the distributor shaft and examine it for cracks and carbon tracks. Replace the cap and rotor if any damage or defects are noted. It is common practice to install a new cap and rotor whenever new spark plug wires are installed, but if you wish to continue using the old cap, check the resistance between the spark plug wires and the cap first. When installing a new cap, remove the wires from the old cap one at a time and attach them to the new cap in the exact same location.
Posted by ToyotaPartsDeal Specialist
Q:
What should be done after disconnecting the wire from the spark plug for the 1998 Toyota T100? Posted by Customer
A:
Push the wire and boot back onto the end of the spark plug, ensuring a tight fit.
Posted by ToyotaPartsDeal Specialist
See expert answers on similar Distributor Cap
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Toyota Part 19101-75010, the Right Choice

Your vehicle deserves only genuine OEM Toyota parts and accessories. To ensure reliability, purchase Toyota part # 19101-75010 Cap Sub-Assy, Distributor. It is sometimes referred to as Toyota Distributor Cap. Our Toyota parts and accessories are expedited directly from authorized Toyota dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM Toyota parts are the best for restoring your vehicle to factory condition performance. This part fits 1996-1997 Toyota 4Runner, 1993-1998 Toyota T100, 1995-1998 Toyota Tacoma.

Affordable, reliable and built to last, Toyota part # 1910175010 Cap Sub-Assy, Distributor stands out as the smart option. ToyotaPartsDeal.com is your prime online source with the biggest and best selection of genuine Toyota parts and accessories at giant discounted prices. We have the OEM Toyota parts and accessories you need at the wholesale prices. ToyotaPartsDeal.com has you covered no matter what type of Toyota vehicle you drive. For detailed Toyota parts information, click here.

Why choose Toyota Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly