Toyota 31301-33010 Pedal Sub-Assy, Clutch

You can Select Your Vehicle to check if 31301-33010 fits your vehicle.

The height of the clutch and brake pedal is the distance the pedal sits off the floor. To check the pedal height, measure the distance between the natural resting place of the pedal and the floor. If the pedal height is not within specifications, it must be adjusted. To adjust the clutch pedal, loosen the locknut and back the pushrod out for clearance. Turn the pushrod to adjust the pedal height in the middle of the specified range, then retighten the locknut. At the brake pedal, loosen the locknut on the brake switch and retract the switch. Before measuring the brake pedal height, make sure the pedal is in the fully-returned position. Measure the pedal height and adjust if necessary. Adjust the brake pedal switch by turning it clockwise until the switch body just contacts the pedal arm, then rotate it counterclockwise to gain the specified clearance and tighten the switch locknut. The freeplay is the pedal slack, or the distance the pedal can be depressed before it begins to have any effect on the clutch or brake system. If the pedal freeplay is not within the specified range, it must be adjusted. To adjust the pedal freeplay, loosen the locknut on the clutch pushrod. Then back out the pushrod to adjust the freeplay to the specified range, then relighten the locknut. Before adjusting brake pedal freeplay, depress the brake pedal several times (with the engine off). Measure the freeplay and adjust if necessary. Loosen the locknut on the pushrod, then back off the pushrod to adjust the pedal freeplay to the specified range and retighten the locknut. With the parking brake released and the engine running, depress the pedal with normal braking effort and have an assistant measure the distance from the center of the pedal pad to the floor.

Pedal height is the distance between the natural resting place of the clutch and brake pedal and the floor. To adjust the clutch pedal, loosen the locknut and adjust the pushrod to achieve the proper height. For the brake pedal, loosen the locknut on the brake switch and retract the switch, then measure and adjust the height if necessary. The brake pedal switch should be adjusted to have the specified clearance. Pedal freeplay is the distance between the natural resting point of the pedal and the point at which resistance is felt. To adjust the freeplay, loosen the locknut on the clutch pushrod and adjust the pushrod to the specified range. For the brake pedal, depress it several times and adjust the freeplay by backing off the pushrod. Brake pedal reserve distance should be measured with the parking brake released and the engine running, and if it is less than specified, troubleshoot the brake system.