Genuine Toyota Avalon Camshaft Seal

Cam Seal

Enter your vehicle info to find more parts and verify fitment

  • Select Vehicle by VIN
  • Select Vehicle by Model
Select by VIN
Enter your VIN for the most accurate results.
Enter your VIN for the most accurate results.
or
Select by Model
-- Select Make --
-- Select Model --
-- Select Year --

1 Camshaft Seal found

  • Toyota Avalon Camshaft Seal - 90080-31035
    View related parts

    Toyota Avalon Seal, Oil

    Part Number: 90080-31035
    • Other Name: Seal, Oil(For Camshaft Setting)
    • Comment: (FOR CAMSHAFT SETTING)
    • Replaced by: 90311-38034
    $9.32 MSRP: $13.02
    You Save: $3.70 (29%)
    Add to Cart
    More Info
    Fits the following Vehicles:
    • 1995-2004 Toyota Avalon | XL, XLS | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCX10L-AEPGKA, MCX10L-AEPGKK, MCX10L-AEPNKA, MCX10L-AEPNKK, MCX10L-AESGKA, MCX10L-AESGKK, MCX10L-AESNKA, MCX10L-AESNKK, MCX20L-AEPGKA, MCX20L-AEPGKK, MCX20L-AEPNKA, MCX20L-AEPNKK, MCX20L-AESGKA, MCX20L-AESNKA
    Less Info

Toyota Avalon Camshaft Seal Parts Questions & Answers

  • Q: How to remove and replace the camshaft seal in a timing belt system on V4 engine?
    A: Take off the Timing Belt, idler pulley, and sprocket when restoring the oil seal on the vehicle. Utilize a socket to drive the seal into place, and ensure it's at the very same depth as the original seal. Check for leaks after operating your vehicle.
  • Q: How do you replace the crankshaft and camshaft oil seals on V6 engine for Toyota Solara and 2002 through 2006 Toyota Avalon?
    A: To remove the crankshaft oil seal, remove the Timing Belt and sprocket. You can take out the old seal, clean the bore, and oil the seal. Use a seal driver tool for installation. Install the sprocket and belt, and check for leaks. For camshaft oil seals, remove the timing belt and sprocket. Also, remove the rear timing belt cover as well as the seal. Clean the bore, oil the new seal, and use a seal driver.
  • Q: How do you remove crankshaft and camshaft oil seals on V6 engine for Toyota Solara and 1997 through 2001 Toyota Avalon?
    A: To remove the crankshaft oil seal, begin by undoing the Timing Belt as well as the sprocket. Clean the bore, oil the new seal, and install it with a seal driver tool. For camshaft oil seals, remove the timing belt and sprocket(s). Discard the rear belt cover.

Related Toyota Avalon Parts