How to replace Ignition Coil?

To disconnect the negative cable from the battery, follow these steps depending on the type of engine. For V6 engines, remove the engine cover, air intake duct, and air filter housing. On 2011 and later models, remove the emission control valve set. For VB engines, remove the throttle body cover and air intake duct. Remove the plastic clips and rubber seal on the left front inner fender well splash shield. Disconnect the air switching valve hoses and unbolt the tube and air switching valve. For 2UZ-FE engines, remove the engine cover, air intake duct, and air filter housing. For 1UR-FE, 3UR-FE, and 3UR-FBE engines, remove the engine cover, air intake duct, and air filter housing. For all models, unscrew the bolt securing each ignition coil/igniter assembly, disconnect the electrical connector, and pull out the assembly. Installation is the reverse of removal.

Genuine Toyota Sequoia Ignition Coil

Ignition Coil Resistor

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

6 Ignition Coils found

View related parts
Toyota Sequoia Ignition Coil Assembly
Part Number: 90919-A2005
- Other Name: Coil Assembly, Ignition; Coil, Ignition Coil
- Replaces: 90919-02256, 90919-A2003, 90919-02255
$89.31 MSRP: $125.89
You Save: $36.58 (30%)

Add to Cart
More Info
Fits the following Vehicles:
2008-2022 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6L, 8 Cyl 5.7L | 1URFE, 3URFBE, 3URFE; 1URFE, 3URFBE, 3URFE; UPK60L-GKTLKA, 3URFE; USK60L-GKTLKA, UPK60L-GKTSKA, UPK65L-GKTLKA, UPK65L-GKTSKA, USK60L-GKTLKA, USK60L-GKTSKA, USK60L-GKTZKA, USK65L-GKTLGA, USK65L-GKTLKA, USK65L-GKTSGA, USK65L-GKTSKA, USK65L-GKTZGA, USK65L-GKTZKA
Less Info
View related parts
Toyota Sequoia Ignition Coil Assembly
Part Number: 90919-02230
- Other Name: Coil Assy, Ignition
- Manufacturer Note: (J)
$111.31 MSRP: $156.91
You Save: $45.60 (30%)

Add to Cart
More Info
Fits the following Vehicles:
2001-2004 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKSLKA, UCK45L-GKSSKA
Less Info
View related parts
Toyota Sequoia Ignition Coil Assembly
Part Number: 90080-19027
- Other Name: Coil Assy, Ignition
- Manufacturer Note: (L)
- Replaced by: 90919-02259
$85.89 MSRP: $121.07
You Save: $35.18 (30%)

Add to Cart
More Info
Fits the following Vehicles:
2004-2010 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA, UCK60L-GKALKA, UCK60L-GKASKA, UCK65L-GKALKA, UCK65L-GKASKA
Less Info
View related parts
Toyota Sequoia Ignition Coil Assembly
Part Number: 90919-A2003
- Other Name: Coil Assy, Ignition
- Replaced by: 90919-A2005
$89.31 MSRP: $125.89
You Save: $36.58 (30%)

Add to Cart
More Info
Fits the following Vehicles:
2008-2010 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 5.7L | 3URFBE, 3URFE; 3URFBE, 3URFE; USK60L-GKTLKA, USK60L-GKTSKA, USK60L-GKTZKA, USK65L-GKTLGA, USK65L-GKTLKA, USK65L-GKTSGA, USK65L-GKTSKA, USK65L-GKTZGA, USK65L-GKTZKA
Less Info
View related parts
Toyota Sequoia Ignition Coil Assembly
Part Number: 90919-02249
- Other Name: Coil Assy, Ignition
- Manufacturer Note: (J)
- Replaced by: 90919-02259
$85.89 MSRP: $121.07
You Save: $35.18 (30%)
More Info
Fits the following Vehicles:
2003-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA
Less Info
View related parts
Toyota Sequoia Ignition Coil Assembly
Part Number: 90919-02250
- Other Name: Coil Assembly, Ignition
More Info
Fits the following Vehicles:
2008-2010 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 5.7L | 3URFBE, 3URFE; 3URFBE, 3URFE; USK60L-GKTLKA, USK60L-GKTSKA, USK60L-GKTZKA, USK65L-GKTLGA, USK65L-GKTLKA, USK65L-GKTSGA, USK65L-GKTSKA, USK65L-GKTZGA, USK65L-GKTZKA
Less Info

Toyota Sequoia Ignition Coil Parts Questions & Answers

Ignition Coil Assembly
90080-19027
Q: How to replace Ignition Coil?
A: To disconnect the negative cable from the battery, follow these steps depending on the type of engine. For V6 engines, remove the engine cover, air intake duct, and air filter housing. On 2011 and later models, remove the emission control valve set. For VB engines, remove the throttle body cover and air intake duct. Remove the plastic clips and rubber seal on the left front inner fender well splash shield. Disconnect the air switching valve hoses and unbolt the tube and air switching valve. For 2UZ-FE engines, remove the engine cover, air intake duct, and air filter housing. For 1UR-FE, 3UR-FE, and 3UR-FBE engines, remove the engine cover, air intake duct, and air filter housing. For all models, unscrew the bolt securing each ignition coil/igniter assembly, disconnect the electrical connector, and pull out the assembly. Installation is the reverse of removal.