This part fits the vehicle you selected:
My Vehicle: 2002 Toyota Tacoma 2 Wheel Drive 6 Cyl 3.4L EFI; Automatic Transmission; 4-Speed Automatic Transmission Floor Shift; Extra Cab; VZN195L-CRPDKAB
The vehicle options this part fits:
  • Production Date: 09/2000-09/2004
  • Fitting Vehicle Options: 5VZFE.. VZN150, 195
Change Vehicle

Toyota 19037-62010 Cord Set, Coil & Spark, W/Resistive

1994-2005 Toyota 1903762010

Toyota 19037-62010 Cord Set, Coil & Spark, W/Resistive
  • Part Description
    Cord Set, Coil & Spark, W/Resistive
  • Part Name Code
    19901
  • Replaced By
    19037-62050
  • Manufacturer
    Toyota
Customer Questions & Answers
This part fits the vehicle you selected:
2002 Toyota Tacoma 2 Wheel Drive 6 Cyl 3.4L EFI; Automatic Transmission; 4-Speed Automatic Transmission Floor Shift; Extra Cab; VZN195L-CRPDKAB
The vehicle options this part fits:
  • Production Date: 09/2000-09/2004
  • Fitting Vehicle Options: 5VZFE.. VZN150, 195
Check another vehicle
$89.07 MSRP: $125.55
You Save: $36.48 (30%)
1
ADD TO CART
Ships in 1-3 Business Days

Product Specifications

BrandGenuine Toyota
Part Name Code19901
Manufacturer Part Number19037-62010
Part DescriptionCord Set, Coil & Spark, W/Resistive
Item Dimensions13.3 x 11.1 x 2.0 inches
Item Weight2.40 Pounds
ConditionNew
Fitment TypeDirect Replacement
ManufacturerToyota
SKU19037-62010
WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
Shipping & ReturnShipping Policy Return Policy
Warning: California’s Proposition 65

Customer Questions & Answers

Q:
Does it fit my car? Posted by ToyotaPartsDeal Specialist
A:
You can Select Your Vehicle to check if 19037-62010 fits your vehicle.
Posted by ToyotaPartsDeal Specialist
Q:
How Do You Check and Replace Spark Plug Wires, Distributor Cap and Distributor Rotor on Toyota 4Runner,Toyota T100 and Toyota Tacoma? Posted by Customer
A:
The spark plug wires should be checked whenever new spark plugs are installed. Begin this procedure by making a visual check of the spark plug wires while the engine is running. In a darkened garage, start the engine and observe each plug wire. If there is a break in the wire, you will see arcing or a small spark at the damaged area. If arcing is noticed, make a note to obtain new wires, then allow the engine to cool and check the distributor cap and rotor. The spark plug wires should be inspected one at a time to prevent mixing up the order. Each original plug wire should be numbered to help identify its location. Disconnect the plug wire from the spark plug, checking inside the boot for corrosion. Push the wire and boot back onto the end of the spark plug, ensuring a tight fit. Wipe the entire length of the wire to remove built-up dirt and grease, checking for burns, cracks, and other damage. Remove the rubber boot (if equipped) and disconnect the wire from the distributor, checking for corrosion and a tight fit. Inspect the remaining spark plug wires, making sure each one is securely fastened at the distributor and spark plug. If new spark plug wires are required, purchase a set for your specific engine model and remove and replace the wires one at a time. Detach the distributor cap (if equipped) and look inside for cracks, carbon tracks, and worn, burned, or loose contacts. Pull the rotor off the distributor shaft and examine it for cracks and carbon tracks. Replace the cap and rotor if any damage or defects are noted. It is common practice to install a new cap and rotor whenever new spark plug wires are installed, but if you wish to continue using the old cap, check the resistance between the spark plug wires and the cap first. When installing a new cap, remove the wires from the old cap one at a time and attach them to the new cap in the exact same location.
Posted by ToyotaPartsDeal Specialist
Q:
Does this set, combined with 3 x Ignition Coils (90919-02212) ... include all the parts needed to connect the cord set to the coils? No additional plastic connection pieces needed? Posted by Customer: 2001 Toyota Tacoma
A:
KIT INCLUDES ALL PARTS
Posted by ToyotaPartsDeal Specialist 28/2/2023
Q:
Does this provide cabled for both banks (6cyl) or one bank (3 cyl) of the engine? Posted by Customer: 1999 Toyota 4Runner
A:
THAT CAR ONLY HAS 3 SPARK PLUG WIRES OTHER BANK IS COILS AND ARE SEPERATE
Posted by ToyotaPartsDeal Specialist 19/5/2022
Q:
I want to order a set of spark plug wires on coil assembly for #3 cylinder complete with the boot. Engine is a 5VZ-FE V6 4X4 AUTO TRANS. Posted by Customer: 2001 Toyota Tacoma
A:
According to the VIN, that is the correct part # for the plug wire set.
Posted by ToyotaPartsDeal Specialist 29/7/2016
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Why choose Toyota Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly