Toyota 90919-01192 Plug, Spark

You can Select Your Vehicle to check if 90919-01192 fits your vehicle.

Spark plug replacement requires a spark plug socket, torque wrench, ratchet, extension, and spark plug gap gauge. The spark plug socket is lined with a rubber grommet to protect the porcelain insulator of the spark plug and hold it in place during installation. The torque wrench is used to tighten the new plugs to the specified torque. When purchasing new spark plugs, it is important to obtain the correct plugs for your specific vehicle, which can be found in the Specifications Section, VEGI label, or owner's manual. Inspect the new plugs for defects, such as cracks in the porcelain insulator. Check the electrode gaps of the new plugs using a wire gauge, adjusting if necessary. To remove the spark plugs, work on one plug at a time, removing the wire and boot by twisting and pulling. Use compressed air to remove any dirt or foreign material from the spark plug area. Unscrew the spark plug using a socket wrench with a long extension. Compare each old spark plug with a chart to determine the engine's overall running condition. Prior to installation, apply anti-seize compound to the plug threads and use a short piece of rubber hose to help align the plug with the plug hole and prevent cross-threading. Tighten the plug to the specified torque and attach the plug wire using a twisting motion. Repeat this process for the remaining spark plugs to prevent mixing up the wires.

Yes.

The gap depends on what vehicle these are going in, but typically these already come pre-gapped and ready to install

It is 1 spark plug per order

These plugs have double grounds near the electrode

Yes, these spark plugs already come pre-gapped