Genuine Toyota Celica Wheel Hub

Toyota Celica Wheel Hub Parts Questions & Answers

• Front Axle Hub Sub-Assembly
  43502-20030
  Q: What is the recommended approach for pressing the front hub and bearing from the steering knuckle?

  A: Due to the complexity and specialized tools needed, it is recommended to entrust the task of pressing the hub and bearing from the Steering Knuckle to a professional mechanic. However, if necessary, the steering knuckle and Wheel Hub can be detached and brought to a dealer service department or another repair shop for the assembly to be addressed.
• Rear Axle Bearing And Hub Assembly, Left
  42450-20051
  Q: How to remove and replace a rear hub and bearing assembly?

  A: Due to the specialized tools needed, it is recommended that a home mechanic does not disassemble the hub and bearing assembly. However, the assembly can be removed and taken to a dealer service department or repair shop for the bearing replacement. To remove the assembly, loosen the wheel lug nuts, raise and stabilize the vehicle on jack stands, and remove the wheel. The brake drum or disc should then be pulled from the hub, and the four hub-to-axle carrier bolts should be removed by turning the hub flange to expose each bolt. Maneuver the hub and bearing assembly through the brake assembly. For installation, the old O-ring on the hub seat should be replaced with a new one. The Wheel Hub should be positioned on the axle carrier, aligning the holes in the backing plate, and the bolts should be installed and tightened. Install the brake drum/disc and wheel, take down the vehicle, and tighten the lug nuts.