Nothing makes a statement quite like custom wheels. These alloys with the TRD logo center cap throw down while styling up.Off-road race-inspired 17-in. x 7-in. cast aluminum wheel with 6 lug nut pattern 11-mm. with 4-mm. wheel offset widens the overall vehicle track width by 0.9-in. (22 mm.) for more aggressive stance Incorporates the proper weight, offset and brake clearance to ensure proper fit, finish and reliability Extensive ride, handling and strength tests ensure wheels meet TRD's high-quality standardsBolt Circle / P.C.D.: 6 On 139.7 Mm Diameter: 17" Finish: Matte Gray Logo: Trd Center Cap Material: Cast Aluminum Number Of Spokes: 6 Offset: 4 Mm Tpms: Compatible Trd: Trd Wheel Width: 7" 17-In. Off-Road Performance Tires Are Often Expected To Experience Greater Tire Wear Than Conventional Tires. Tire Life May Be Substantially Less Than Mileage Expectancy, Depending Upon Tires Used And Driving Conditions
Trail Teams Edition Wheel, Matte Black Finish. Only available for Trail Teams Special Edition vehicles. ***NOTE*** Wheel no longer available for general sale, only for replacement part.
Minus-one fitment allows for larger-side-wall tires to improve off-road ride and handling
Reflects TRD’s study of vehicle’s original design criteria and utilizes state-of-the-art CAD techniques to create the optimal wheel for the FJ Cruiser
Alloy wheels—in comparison to typical steel wheels—are lighter, provide better heat dissipation and greater rigidity under high-load cornering maneuvers
Incorporates the proper weight, offset and brake clearance to ensure proper fit, finish and reliability
Extensive ride, handling and strength tests ensure wheels meet TRD's high quality standards
Other Name: TRD Lug 6PCS W ToolReplaces: PT901-42601-T4, PTR01-34020-T4
Drive Description:Spline Drive
Finish:Chrome
Number Of Pieces:6
Trd:TRD
Wheel Lock Dimension:12 mm
$37.53MSRP: $52.47
You Save: $14.94 (29%)
More Info
Fits the following Toyota Models
2010-2014 Toyota FJ Cruiser
This is the traditional TRD Chrome, Spline-Drive, CONICAL-SEAT lugnut with a captured conical swivel washer. It is designed for the standard 12mm x 1.5 OE thread pitch found on almost all Toyota/Scion/Lexus vehicles. This kit is designed for a 6 lug wheel. For a vehicle set of 4 (6 lug) wheels you will need to order four of these lugnut sets. For a vehicle set of 4 (4 lug) wheels you will need to order three of these lugnut sets, and you will have two lugnuts left over, etc. e.g. 6 x 3 18. 18-16
Off-road-inspired 16-in. x 7.5-in. x 10-mm. six-spoke low-pressure alloy wheels with 6 on 139.7-mm. (5.5-in.) bolt circle and 106-mm. nominal center bore
Designed for use with 12-mm. conical-seat spline-drive lug nuts (REQUIRED)
Features bronze, black or grey painted finish and machined outer lip with beadlock ring styling to add to the vehicle’s rugged, off-road look
TRD embossed snap-in center cap included
Low-pressure alloy helps provide a higher strength-to-weight ratio for optimal performance and durability
Incorporates the proper weight, offset and brake clearance to ensure fit, finish, and reliability
Maintains OE ride quality and handling characteristics
TRD alloy wheels are typically lighter than stock wheels, dissipate heat extremely well, and provide a higher strength-to-weight ratio to help keep corner weight down. And the look? They speak for themselves.
Off-road race-inspired 16-in. x 7.5-in. x 10-mm. six-spoke low-pressure alloy wheels with 6 on 139.7-mm. (5.5-in.) bolt circle and 106-mm. nominal center bore
Features bronze or black or graphite painted finish and machined outer lip with beadlock ring styling, with TRD embossed snap-in center cap included
Incorporates the proper weight, offset and brake clearance to ensure fit, finish, and reliability
Off-road-inspired 16-in. x 7.5-in. x 10-mm. six-spoke low-pressure alloy wheels with 6 on 139.7-mm. (5.5-in.) bolt circle and 106-mm. nominal center bore
Designed for use with 12-mm. conical-seat spline-drive lug nuts (REQUIRED)
Features bronze or black or grey painted finish and machined outer lip with beadlock ring styling to add to the vehicle’s rugged, off-road look
TRD embossed snap-in center cap included
Low-pressure alloy helps provide a higher strength-to-weight ratio for optimal performance and durability
Incorporates the proper weight, offset and brake clearance to ensure fit, finish, and reliability
Maintains OE ride quality and handling characteristics