My Garage
My Account
Cart
Genuine Toyota Sequoia Towing Wire Harnesses and Adapters
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
8 Genuine Toyota Sequoia Towing Wire Harnesses and Adapters found
Toyota Sequoia Liftgate - Power Actuator (Rear Tailgate)Part Number: 08930-48010$123.47 MSRP: $175.53You Save: $52.06 (30%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Converter Kit
Fits the following Toyota Models
- 2024-2026 Toyota Sequoia
- Toyota Converter Kit #08930-48010 is a towing electrical component that adapts your Toyota wiring for trailer light operation. It supports proper signal transfer between the vehicle and trailer, helping your towing setup work with the electrical requirements of your Toyota.Trailer Light Output: Converts vehicle signals for trailer lamp operationWiring Compatibility: Connects towing electronics with matched Toyota specificationsIntegrated Towing Support: Works with harnesses and towing adaptersModel-Specific Design: Engineered for your Toyota electrical systemGenuine Toyota parts are designed to fit your specific Toyota model and are backed by Toyota's genuine parts warranty.
- Toyota Sequoia Connector Wiring HarnessPart Number: 82824-WAA22$3.11 MSRP: $4.34You Save: $1.23 (29%)Ships in 1-3 Business DaysProduct Specifications
- Other Name: Connector Wiring Har
Fits the following Toyota Models
- 2024-2026 Toyota Sequoia
- The Toyota Connector Wiring Harness #82824-WAA22 is an electrical connection component that links compatible interior convenience accessories to your vehicle’s wiring system. It provides a model-matched connection point that supports clean integration and consistent accessory operation.Accessory Connection: Links interior components to vehicle wiringModel-Matched Design: Engineered for Toyota electrical specificationsClean Integration: Supports organized, secure accessory installationConsistent Power Flow: Maintains reliable electrical connectivityGenuine Toyota parts are designed to fit your specific Toyota model and are backed by Toyota's genuine parts warranty.
- Toyota Sequoia Connector Wiring HarnessPart Number: 82824-WAA40$4.81 MSRP: $6.72You Save: $1.91 (29%)Ships in 1-3 Business DaysProduct Specifications
- Other Name: Connector Wiring Har
Fits the following Toyota Models
- 2024-2026 Toyota Sequoia
- The Toyota Connector Wiring Harness #82824-WAA40 is an electrical connection component that links compatible interior convenience accessories to your vehicle’s wiring system. It provides a model-matched connection point that supports clean integration and consistent accessory operation.Accessory Connection: Links interior components to vehicle wiringModel-Matched Design: Engineered for Toyota electrical specificationsClean Integration: Supports organized, secure accessory installationConsistent Power Flow: Maintains reliable electrical connectivityGenuine Toyota parts are designed to fit your specific Toyota model and are backed by Toyota's genuine parts warranty.
Toyota Sequoia 7-Pin And 4-Pin Trailer Connector. Towing Wire Harnesses And Adapters.Part Number: PT725-34140$53.55 MSRP: $65.00You Save: $11.45 (18%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Tow WREHRNSS TUNDRA
- Connectors: 7 Pin/4 Pin
Fits the following Toyota Models
- 2012-2014 Toyota Sequoia
- Connecting your trailer to your vehicle is a breeze with this combination 7-pin and 4-pin trailer connector. ___Available on 4.6L V8 models only_Powers trailer’s taillights, turn, brake and hazard lights_Designed to work with the existing electrical system_Allows for connection of either a 7-pin or a 4-pin connector from the trailer_Simple installation___
Toyota Sequoia 7-Pin To 4-Pin Adapter. Towing Wire Harnesses And Adapters.Part Number: PT791-89040$15.87 MSRP: $22.18You Save: $6.31 (29%)Ships in 1 Business DayProduct Specifications- Other Name: 7PIN To 4PIN Adaptor
- Number Of Pins: 7-pin/4-pin
Fits the following Toyota Models
- 2004-2012 Toyota Sequoia
- For the smaller towing jobs, this easy-to-install adapter converts a 7-pin round to a 4-pin flat connector.Designed to work specifically with the Toyota Towing wire harness Allows a standard four-way flat-wired trailer to be connected without the need to rewire the trailer or purchase additional harnesses Provides higher level of towing flexibility while protecting vehicle's wiringNumber Of Pins: 7-Pin/4-Pin Before Towing, Confirm That Your Vehicle And Trailer Are Compatible And Properly Hooked Up And Loaded, And That You Have Any Necessary Additional Equipment. Do Not Exceed Any Weight Rating And Follow All Instructions In Your Owner’S Manual. The Maximum You Can Tow Depends On The Total Weight Of Your Cargo, Occupants And Available Equipment.
- Toyota Sequoia Heritage Grille Letter Overlay - Wavemaker (796)Part Number: PT948-34253-07$179.80 MSRP: $255.00You Save: $75.20 (30%)Ships in 1-2 Business DaysProduct Specifications
- Other Name: SEQ/TUN EEMB 796 WAV
- Color : 796 Wave Maker
- Color: 796 Wave Maker
- Manufacturing Process: Thermoform & Urethane
Fits the following Toyota Models
- 2025 Toyota Sequoia
- Heritage Grile Letter Overlay - Wavemaker color (796)This overlay is engineered to precisely fit over existing badges making it easy to customize in minutes.Easy to install-simply remove tape line and apply over clean badges
- Toyota Sequoia Electrical - Toyota Tacoma Wiring HarnessPart Number: PT974-00241-AA$37.28 MSRP: $52.12You Save: $14.84 (29%)Ships in 1-2 Business DaysProduct Specifications
- Other Name: SEQH CLEVIS
- Location: Front
Fits the following Toyota Models
- 2024-2026 Toyota Sequoia
- The Toyota Genuine Clevis #PT974-00241-AA is a heavy-duty off-road recovery attachment designed to provide a secure connection point when using compatible towing or recovery equipment.Recovery Support: helps create a stable attachment point for recovery straps, hooks, or other compatible gearBuilt for Demanding Use: made for rugged exterior applications where strength and dependable fit matterToyota Fit and Compatibility: designed to work with applicable Toyota off-road setups for more confident vehicle recovery preparationFor drivers who equip their truck or SUV for trail use, this accessory adds practical utility when preparing for off-road situations and recovery tasks. The product is backed by Toyota's genuine parts warranty.
Toyota Sequoia Quick Charging Cable PackagePart Number: PTQ76-00230$64.90 MSRP: $75.00You Save: $10.10 (14%)Ships in 1-2 Business DaysProduct Specifications- Other Name: MULTI CHARGE CABLE
- Replaces: PT976-03200
- Location: Interior
Fits the following Toyota Models
- 2024-2026 Toyota Sequoia
- Automotive grade quality USB charging cables are a convenient way to have your mobile devices charged while on the go. Includes:1-Apple Lightning to USB-A Cable - 3’1-Apple Lightning to USB-C Cable - 3’1-USB-C to USB-A Cable - 3’1-USB-C to USB-C Cable - 3’