0 My Cart

Customer Support:  Customer Service - Live Chat Live Chat or Customer Service - Phone 1-888-905-9199

Genuine Toyota Supercharger

6 Supercharger founded. Select your vehicle to refine your results.

  • Installation Kit

    Part Fitment Instructions
    • 2015 Toyota Sequoia
    • 2015 Toyota Tundra
    • 2014 Toyota Sequoia
    • 2014 Toyota Tundra
    • 2013 Toyota Sequoia
    • 2012 Toyota Sequoia
    • 2011 Toyota Sequoia
    • 2010 Toyota Sequoia
    • 2009 Toyota Sequoia
    • 2008 Toyota Sequoia
  • $25.67 $35.50

    You Save: $9.83

    • Hoist Mounting Bracket
    • Aids in the installation of TRD Supercharger
    • Bolts directly onto the Supercharger housing lid
    • Stamped Steel
    • Plated
    Part Fitment Attribute
    • 2015 Toyota Tundra
    • 2014 Toyota Tundra
    • 2013 Toyota Sequoia
    • 2013 Toyota Tundra
    • 2012 Toyota Sequoia
    • 2012 Toyota Tundra
    TRD:TRD
    • Features air-to-liquid intercooler with a low-temperature radiator, coolant reservoir and circulation pump, delivering improved engine response and power output.
    • Intercooler provides higher performance and better fuel economy, as well as improved passing power than non-intercooled superchargers, restoring sea level performance when at altitude.
    • Produces 304 hp @ 5,400 rpm and 334 lb.-ft. torque @ 3,600 rpm (from 239 hp @ 5200 rpm; 278 lb.-ft. @ 3700 rpm.
    • Uses Eaton Roots-type rotating components in a compact one-piece, supercharger plenum/manifold casting that integrates the heat exchanger core for the intercooler.
    • Integral by-pass valve prevents supercharger from going into "boost" when driving at a steady state of speed such as on the highway or light traffic. Takes less than ½ hp to operate when by-pass valve is open, helping reduce parasitic drag from the crankshaft.
    • Kit includes new 455cc fuel injectors for the increased power output, iridium spark plugs for better detonation resistance—ensuring proper fuel delivery when using supercharger system at full capacity.
    • Integrates factory calibration of ECU for optimal fuel mileage when combined with torque/horsepower increase.
    • All OE hose connections accommodated and OE throttle body bolts to original location.
    • Complete kit includes all necessary hardware for "factory installed" appearance. No cutting, welding or fabrication required for installation.
    • Supercharger has self-contained lubrication, so there's no maintenance required on supercharger—or supercharger system components.
    • Emissions legal in all 50 states
    Part Fitment Attribute
    • 2015 Toyota Tacoma
    • 2014 Toyota Tacoma
    • 2013 Toyota Tacoma
    • 2012 Toyota Tacoma
    Emissions Legal:Yes
    Engine Type:Non Roller Rocker
    Kit Type:Main Assembly
    TRD:TRD
    • Crank-driven supercharger increases torque and horsepower from idle to redline, delivering immediate throttle response—producing 504 hp @ 5,500 rpm and 550 lb.-ft. torque @ 3,600 rpm (from 381 hp @ 5600 rpm and 401 lb.-ft. torque @ 3600 rpm)
    • Integral by-pass valve prevents supercharger from going into boost when driving at a steady state of speed such as on the highway or in light traffic; takes less than ½ hp to operate when by-pass valve is open, helping reduce parasitic drag from the crankshaft
    • Self-contained air-to-liquid intercooler gives higher performance, better fuel mileage, improved towing capacity and passing power than non-intercooled
    • Gen 6 four-lobe rotor design features a high-twist 180-degree helix for improved efficiency, requiring less power to drive; generates less temperature in boost and is substantially quieter than earlier Gen 5 technology
    • Upgraded fuel system includes larger fuel injectors, allowing for proper fuel delivery when using supercharger system at full capacity
    • Factory calibration of ECU offers optimal performance and fuel mileage when combined with the increase in torque and horsepower
    • Increases towing capacity, acceleration

     

    • Complete kit includes all necessary hardware for factory installed appearance; no cutting, welding or fabrication required for supercharger installation
    • Supercharger has self-contained lubrication; virtually no maintenance required on supercharger—or supercharger system components
    • Emissions legal in all 50 states
      • This supercharger is only approved for installation on Gasoline Fueled vehicle applications. No Flex Fuel vehicle applications are approved.
    Part Fitment Attribute Instructions
    • 2013 Toyota Tundra
    • 2012 Toyota Tundra
    Engine Type:5.7l V8
    Kit Type:Fit Kit
    TRD:TRD
  • $2668.00 $2800.00

    You Save: $132.00

    • Requires a Supercharger be ordered for the install
    • Kit Contents:
      • Low Temperature Radiator
      • TRD Air Filter
      • Air Box Lid
      • Coolant Cross Over Manifold
      • Hardware bags A - I
      • 8 Rib Belt
    Part Fitment Attribute Instructions
    • 2013 Toyota Sequoia
    • 2012 Toyota Sequoia
    Engine Type:5.7l V8
    Kit Type:Fit Kit
    TRD:TRD
    • Features air-to-liquid intercooler with a low-temperature radiator, coolant reservoir and circulation pump, delivering improved engine response and power output.
    • Intercooler provides higher performance and better fuel economy, as well as improved passing power and towing capacity than non-intercooled superchargers, restoring sea level performance when at altitude.
    • Produces 304 hp @ 5,400 rpm and 334 lb.-ft. torque @ 3,600 rpm (from 236 hp @ 5,200 rpm and 266 lb.-ft. @ 4,000 rpm Tacoma.  Performance improvements validated using SAE testing standards.
    • Integral by-pass valve prevents supercharger from going into "boost" when driving at a steady state of speed such as on the highway or light traffic. Takes less than ½ hp to operate when by-pass valve is open, helping reduce parasitic drag from the crankshaft.
    • Kit includes 455cc fuel injectors for increased power output, iridium spark plugs for better detonation resistance—ensuring proper fuel delivery when using supercharger system at full capacity.
    • Integrates factory calibration of ECU for optimal fuel mileage when combined with torque/horsepower increase.
    • All OE hose connections accommodated and OE throttle body bolts to original location.
    • Complete kit includes all necessary hardware for "factory installed" appearance. No cutting, welding or fabrication required for installation.
    • Supercharger has self-contained lubrication, so there's no maintenance required on supercharger—or supercharger system components.
    • Emissions legal in all 50 states
    • Warranty is the same as other TRD powertrain components: 12 months or 12,000 miles or the balance of the 5 year/60,000 new car powertrain warranty, whichever is greater, when installed by an authorized Toyota dealer. Superchargers installed by anyone other than an authorized Toyota dealer are warranted for 12 months or 12,000 miles.
    Part Fitment Attribute
    • 2015 Toyota Tacoma
    • 2014 Toyota Tacoma
    • 2013 Toyota Tacoma
    • 2012 Toyota Tacoma
    • 2011 Toyota Tacoma
    • 2010 Toyota Tacoma
    • 2009 Toyota Tacoma
    • 2008 Toyota Tacoma
    • 2007 Toyota Tacoma
    • 2006 Toyota Tacoma
    Emissions Legal:Yes
    Engine Type:Non Roller Rocker
    Kit Type:Fit Kit
    TRD:TRD

Featured Toyota Supercharger

 
Item has been added to your cart!

Part No.:

Qty.

Price: $0.00

Subtotal: $0.00

This part contains hazardous material.

This part is a packaged part and contains multiple quantities of: (Pack Qty: 4)

This part is a packaged part and contains multiple quantities of the same item. In an effort to simplify packaging Toyota will sometimes include multiple parts in a package.