Genuine Toyota Avalon Battery Cable

Toyota Avalon Battery Cable Parts Questions & Answers

• Cable, Bond
  90084-98001
  Q: How to inspect and replace battery cables?

  A: Periodically inspect the entire length of each battery cable for damage, cracked or burned insulation and corrosion. Poor battery cable connections can cause starting problems and decreased engine performance. Check the cable-to-terminal connections at the ends of the cables for cracks, loose wire strands and corrosion. The presence of white, fluffy deposits under the insulation at the cable terminal connection is a sign that the cable is corroded and should be replaced. Check the terminals for distortion, missing mounting bolts and corrosion. When removing the cables, always disconnect the negative cable first and hook it up last or the battery may be shorted by the tool used to loosen the cable clamps. Even if only the positive cable is being replaced, be sure to disconnect the negative cable from the battery first. If the radio in your vehicle is equipped with an anti-theft system, make sure you have the correct activation code before disconnecting the battery. Disconnect the old cables from the battery, then trace each of them to their opposite ends and detach them from the Starter Solenoid and ground terminals. Note the routing of each cable to ensure correct installation. If you are replacing either or both of the old cables, take them with you when buying new cables. It is vitally important that you replace the cables with identical parts. Cables have characteristics that make them easy to identify: positive cables are usually red and larger in cross-section, ground cables are usually black and smaller in cross section. Clean the threads of the solenoid or ground connection with a wire brush to remove rust and corrosion. Apply a light coat of battery terminal corrosion inhibitor, or petroleum jelly, to the threads to prevent future corrosion. Attach the cable to the solenoid or ground connection and tighten the mounting nut bolt securely. Before connecting a new cable to the battery, make sure that it reaches the battery post without having to be stretched. Connect the positive cable first, followed by the negative cable.
• Cable, Bond
  90980-07422
  Q: How to remove and replace battery cables?

  A: When removing Car Batteries Cable, always disconnect negative battery terminal first and hook up last to avoid shorting out battery. Even if only replacing positive cable, crucial to disconnect negative cable first. After disconnecting old cables from battery, trace each to opposite ends and disconnect, noting routing for correct installation. If replacing old cables, take them when buying new ones for identical parts. Clean solenoid or ground connection threads with wire brush to remove rust and corrosion, apply light coat of corrosion inhibitor or petroleum jelly to prevent future corrosion. Attach cable to solenoid or ground connection, tighten mounting nut/bolt securely. Before connecting new cable to battery, ensure it reaches post without needing to be stretched. Finally, connect cable to positive battery terminal first, followed by connecting ground cable to negative battery terminal.