How to remove and install the Mirror Switch, hazard warning switch, and dimmer switch on Toyota Matrix?

For the hazard warning switch and rear window defogger switch replacement, remove the cable from negative terminal on the battery. Subsequently, make gentle extractions of the center finish panel of the instrument panel and also pull the assembly to disconnect the electrical connector at the rear part of the switches. Hold with one screwdriver at the holes as shown in picture #3 and turn the second screwdriver to compress the switch retaining tangs and pull out the switches, to install the switches reverse the process. As for the power mirror control switch and dimmer switch, these can commonly be found in a small panel to the left of the steering column; required steps will involve first carefully detaching this panel from the dash to access the electrical connector and then removing the switches, which will entail applying two screwdrivers to release the clips holding them in place; as for the reassembly of the switches, define the above given set of instructions in reverse.

Genuine Toyota Matrix Hazard Warning Switch

Hazard Warning Emergency Light Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Hazard Warning Switches found

View related parts
Toyota Matrix Hazard Warning Signal Switch Assembly
Part Number: 84332-01070
$74.68 MSRP: $105.27
You Save: $30.59 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy, Hazard Warning Signal; Hazard Switch
- Warranty: This genuine Toyota part is covered by warranty.
Fits the following Vehicles:
- 2003-2008 Toyota Matrix | CE, LE, S, STD, XR, XRS | 4 Cyl 1.8L | 1ZZFE, 2ZZGE; ZZE130L-DEMDKA, ZZE130L-DEMDKK, ZZE130L-DEMNKA, ZZE130L-DEMNKK, ZZE130L-DEMSKA, ZZE130L-DEMSKK, ZZE130L-DEPDKA, ZZE130L-DEPDKK, ZZE130L-DEPNKA, ZZE130L-DEPNKK, ZZE130L-DEPSKA, ZZE130L-DEPSKK, ZZE131L-DEFSFA, ZZE131L-DEFSFK, ZZE132L-DHMDKA, ZZE132L-DHMDKK, ZZE132L-DHMNKA, ZZE132L-DHMNKK, ZZE132L-DHPDKA, ZZE132L-DHPDKK, ZZE132L-DHPNKA, ZZE132L-DHPNKK, ZZE133L-DHFSFA, ZZE133L-DHFSFK, ZZE133L-DHPSFA, ZZE133L-DHPSFK, ZZE134L-DHPDKA, ZZE134L-DHPDKK, ZZE134L-DHPNKA, ZZE134L-DHPNKK
View related parts
Toyota Matrix Hazard Warning Signal Switch Assembly
Part Number: 84332-02160
$63.35 MSRP: $89.31
You Save: $25.96 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy, Hazard Warning Signal
- Replaced by: 84332-02161
- Warranty: This genuine Toyota part is covered by warranty.
Fits the following Vehicles:
- 2009-2014 Toyota Matrix | 4 Cyl 1.8L, 4 Cyl 2.4L | 2AZFE, 2ZRFE; AZE141L-DHANKA, AZE141L-DHANKK, AZE141L-DHMNKA, AZE141L-DHMNKK, AZE144L-DHPNKA, AZE144L-DHPNKK, AZE146L-DHASKA, AZE146L-DHASKK, AZE146L-DHMSKA, AZE146L-DHMSKK, ZRE142L-DHMDKA, ZRE142L-DHMDKK, ZRE142L-DHPDKA, ZRE142L-DHPDKK
View related parts
Toyota Matrix Hazard Warning Signal Switch Assembly
Part Number: 84332-02100
$71.97 MSRP: $101.45
You Save: $29.48 (30%)
Product Specifications
- Other Name: Switch Assy, Hazard Warning Signal; Hazard Switch
- Warranty: This genuine Toyota part is covered by warranty.
Fits the following Vehicles:
- 2003-2008 Toyota Matrix | CE, LE, S, STD, XR, XRS | 4 Cyl 1.8L | 1ZZFE, 2ZZGE; ZZE130L-DEMDKA, ZZE130L-DEMDKK, ZZE130L-DEMNKA, ZZE130L-DEMNKK, ZZE130L-DEMSKA, ZZE130L-DEMSKK, ZZE130L-DEPDKA, ZZE130L-DEPDKK, ZZE130L-DEPNKA, ZZE130L-DEPNKK, ZZE130L-DEPSKA, ZZE130L-DEPSKK, ZZE131L-DEFSFA, ZZE131L-DEFSFK, ZZE132L-DHMDKA, ZZE132L-DHMDKK, ZZE132L-DHMNKA, ZZE132L-DHMNKK, ZZE132L-DHPDKA, ZZE132L-DHPDKK, ZZE132L-DHPNKA, ZZE132L-DHPNKK, ZZE133L-DHFSFA, ZZE133L-DHFSFK, ZZE133L-DHPSFA, ZZE133L-DHPSFK, ZZE134L-DHPDKA, ZZE134L-DHPDKK, ZZE134L-DHPNKA, ZZE134L-DHPNKK

Toyota Matrix Hazard Warning Switch

The Toyota Matrix Hazard Warning Switch activates the emergency flashers, causing all of the turn signal lamps to blink together in a timely fashion when urgent attention is needed. The Hazard Warning Switch, which is located on the dashboard, completes an electrical circuit to power both the left and right indicator bulbs simultaneously and in an alternating pattern, thus making it very visible. When pressed, the Hazard Warning Switch will allow current to the flasher relay. As it operates, the lights will alternate flashing until you press the switch again, opening the circuit and returning control of the lights to the turn signal stalk in the normal position. Communication of a breakdown, sudden slowdown, or roadside stop to traffic approaching from behind is made simple to execute by the Toyota Matrix Hazard Warning Switch. The component is designed to fit the original lighting system of the Toyota Matrix without adding extra features, and its uncomplicated mechanical action makes the Hazard Warning Switch a key safety control on every Toyota Matrix.

If you are in demand for superior quality and affordable OEM Toyota Matrix Hazard Warning Switch, then shop with us! We own a wide range of the reduced-priced genuine Toyota Matrix Hazard Warning Switch. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Matrix Hazard Warning Switch Parts Questions & Experts Answers

Hazard Warning Signal Switch Assembly
84332-01070
Q: How to remove and install the Mirror Switch, hazard warning switch, and dimmer switch on Toyota Matrix?
A:
For the hazard warning switch and rear window defogger switch replacement, remove the cable from negative terminal on the battery. Subsequently, make gentle extractions of the center finish panel of the instrument panel and also pull the assembly to disconnect the electrical connector at the rear part of the switches. Hold with one screwdriver at the holes as shown in picture #3 and turn the second screwdriver to compress the switch retaining tangs and pull out the switches, to install the switches reverse the process. As for the power mirror control switch and dimmer switch, these can commonly be found in a small panel to the left of the steering column; required steps will involve first carefully detaching this panel from the dash to access the electrical connector and then removing the switches, which will entail applying two screwdrivers to release the clips holding them in place; as for the reassembly of the switches, define the above given set of instructions in reverse.