How to remove and install a hood on a Toyota Matrix?

To remove the hood, first mark the hinge plate for proper alignment during installation. Then, use blankets or pads to protect the body and paint as the hood is lifted off. Disconnect any cables or wires that may interfere with removal and have an assistant support one side of the hood while you support the other. Simultaneously remove the hinge-to-hood bolts and lift off the hood. To install, simply reverse the removal process. For adjustment, fore-and-aft and side-to-side adjustment of the hood is done by moving the hinge plate slot after loosening the bolts. The entire hood latch assembly can also be adjusted up and down as well as from side-to-side on the radiator support so the hood closes securely, flush with the fenders. Finally, adjust the hood bumpers on the radiator support so the hood, when closed, is flush with the fenders. The hood latch assembly, as well as the hinges, should be periodically lubricated with white, lithium-base grease to prevent binding and wear.

Genuine Toyota Matrix Hood

Engine Hood

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Hoods found

View related parts
Toyota Matrix Hood Sub-Assembly
Part Number: 53301-02110
$285.12 MSRP: $408.83
You Save: $123.71 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Sub-Assy; Hood
- Replaces: 53301-1A030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2008 Toyota Matrix | CE, LE, S, STD, XR, XRS | 4 Cyl 1.8L | 1ZZFE, 2ZZGE; ZZE130L-DEMDKA, ZZE130L-DEMDKK, ZZE130L-DEMNKA, ZZE130L-DEMNKK, ZZE130L-DEMSKA, ZZE130L-DEMSKK, ZZE130L-DEPDKA, ZZE130L-DEPDKK, ZZE130L-DEPNKA, ZZE130L-DEPNKK, ZZE130L-DEPSKA, ZZE130L-DEPSKK, ZZE131L-DEFSFA, ZZE131L-DEFSFK, ZZE132L-DHMDKA, ZZE132L-DHMDKK, ZZE132L-DHMNKA, ZZE132L-DHMNKK, ZZE132L-DHPDKA, ZZE132L-DHPDKK, ZZE132L-DHPNKA, ZZE132L-DHPNKK, ZZE133L-DHFSFA, ZZE133L-DHFSFK, ZZE133L-DHPSFA, ZZE133L-DHPSFK, ZZE134L-DHPDKA, ZZE134L-DHPDKK, ZZE134L-DHPNKA, ZZE134L-DHPNKK
View related parts
Toyota Matrix Hood Sub-Assembly
Part Number: 53301-02220
$309.71 MSRP: $444.10
You Save: $134.39 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Sub-Assy; Hood
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2014 Toyota Matrix | 4 Cyl 1.8L, 4 Cyl 2.4L | 2AZFE, 2ZRFE; AZE141L-DHANKA, AZE141L-DHANKK, AZE141L-DHMNKA, AZE141L-DHMNKK, AZE144L-DHPNKA, AZE144L-DHPNKK, AZE146L-DHASKA, AZE146L-DHASKK, AZE146L-DHMSKA, AZE146L-DHMSKK, ZRE142L-DHMDKA, ZRE142L-DHMDKK, ZRE142L-DHPDKA, ZRE142L-DHPDKK
View related parts
Toyota Matrix Hood Sub-Assembly
Part Number: 53301-02130
$300.31 MSRP: $430.62
You Save: $130.31 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood Sub-Assy; Hood
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2008 Toyota Matrix | CE, LE, S, STD, XR, XRS | 4 Cyl 1.8L | 1ZZFE, 2ZZGE; ZZE130L-DEMDKA, ZZE130L-DEMDKK, ZZE130L-DEMNKA, ZZE130L-DEMNKK, ZZE130L-DEMSKA, ZZE130L-DEMSKK, ZZE130L-DEPDKA, ZZE130L-DEPDKK, ZZE130L-DEPNKA, ZZE130L-DEPNKK, ZZE130L-DEPSKA, ZZE130L-DEPSKK, ZZE131L-DEFSFA, ZZE131L-DEFSFK, ZZE132L-DHMDKA, ZZE132L-DHMDKK, ZZE132L-DHMNKA, ZZE132L-DHMNKK, ZZE132L-DHPDKA, ZZE132L-DHPDKK, ZZE132L-DHPNKA, ZZE132L-DHPNKK, ZZE133L-DHFSFA, ZZE133L-DHFSFK, ZZE133L-DHPSFA, ZZE133L-DHPSFK, ZZE134L-DHPDKA, ZZE134L-DHPDKK, ZZE134L-DHPNKA, ZZE134L-DHPNKK

Toyota Matrix Hood

The Toyota Matrix Hood is the front shield that permits owners to access the engine easily. It also serves as a guard for important parts against the weather and road debris. Thanks to strong latches and support struts, the hinged Hood lifts smoothly for easy access during regular checks. The Hood is designed to crumple in a collision, absorbing the energy of the impact before it reaches the cabin of the vehicle. Some of the Matrix models use heavy-duty steel panels, while others use lighter aluminum but keep the Hood for protection. Some special editions go a step further, experimenting with fiberglass skins to shave weight. You can see how varied the Hood materials are while the hinges and latch positions are familiar to every Toyota fan. These front covers sit flush with the fenders, assisting with airflow, dampening engine noise, and opening wide enough for easy access to spark plugs or to top up fluids, whatever the build material. A release lever located within the vehicle connects with a second catch at the front. The purpose of this is to stop the panel from popping up accidentally while driving. Drivers appreciate that Toyota retained the identity of the Matrix model by aligning the panel gaps with the rest of the body so that style can also go ahead with safety.

If you are in demand for superior quality and affordable OEM Toyota Matrix Hood, then shop with us! We own a wide range of the reduced-priced genuine Toyota Matrix Hood. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Matrix Hood Parts Questions & Experts Answers

Hood Sub-Assembly
53301-02110
Q: How to remove and install a hood on a Toyota Matrix?
A:
To remove the hood, first mark the hinge plate for proper alignment during installation. Then, use blankets or pads to protect the body and paint as the hood is lifted off. Disconnect any cables or wires that may interfere with removal and have an assistant support one side of the hood while you support the other. Simultaneously remove the hinge-to-hood bolts and lift off the hood. To install, simply reverse the removal process. For adjustment, fore-and-aft and side-to-side adjustment of the hood is done by moving the hinge plate slot after loosening the bolts. The entire Hood Latch assembly can also be adjusted up and down as well as from side-to-side on the radiator support so the hood closes securely, flush with the fenders. Finally, adjust the hood bumpers on the radiator support so the hood, when closed, is flush with the fenders. The hood latch assembly, as well as the hinges, should be periodically lubricated with white, lithium-base grease to prevent binding and wear.