Genuine Toyota Sequoia Sway Bar Kit

Toyota Sequoia Sway Bar Kit Parts Questions & Answers

• Bar, Stabilizer, Rear
  48812-0C020
  Q: How to remove and install the rear stabilizer bar on a Toyota Sequoia?

  A: Lift the vehicle's rear, secure on jackstands and block front wheels. Remove sway bar kit link nuts and links, then detach bushing bracket bolts and the sway bar kit. Inspect rubber bushings for damage and replace if needed. Check balljoint for wear by testing rotational torque. When reinstalling, position bushings with slits facing vehicle front. Reverse the removal process for installation, ensuring all fasteners are tightened.
• Bar, Stabilizer, Front
  48811-0C030
  Q: How to remove and install the front stabilizer bar and bushing?

  A: Lift the vehicle and secure on jackstands. Detach the sway bar kit links and remove them from the bar and lower Control Arms. Remove the sway bar kit and its sway bar bushings. Inspect sway bar bushings for damage and replace if needed. Check the balljoint on each link for wear. Test the balljoint's rotational torque with a torque wrench. When reinstalling, position sway bar bushings with slits facing the vehicle's front. Follow the reverse process of removal for installation. Ensure all fasteners are tightened.