My Garage
My Account
Cart
Genuine Toyota Sienna Fuel Door Release Cable
Gas Door Safety Release Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Fuel Door Release Cables found
Toyota Sienna Fuel Lid Lock Control Cable Sub-Assembly
Part Number: 77035-AE010$40.92 MSRP: $57.20You Save: $16.28 (29%)Ships in 1-3 Business Days
Toyota Sienna Fuel Door Release Cable
The driver is allowed to open the outside fuel door from inside the cabin with the help of the Toyota Sienna Fuel Door Release Cable. Every Toyota Sienna comes equipped with a flexible steel core that conveniently slips inside a protective sleeve located between the interior lever and the latch behind the small square door. When one makes a quick pull, a series of actions will ensue. Specifically, a downward motion occurs at the interior lever. Consequently, this unlatches the hinge. As a result, the door pops outward. The spring-loaded door opens and closes with ease when the Fuel Door Release Cable is unbroken. When the Fuel Door Release Cable breaks, stretches, or corrodes, the door can get stuck locked and the fuel cap will be inaccessible until it is repaired. Dents, rust, and loose hinges can give rise to stress that can over time weaken the Fuel Door Release Cable, so replacing it promptly will restore normal action to the lever and maintain the aesthetics of the vehicle. As no alternative version is identified for the Toyota Sienna, the Fuel Door Release Cable is only defined in one standard version. The Toyota Sienna's fuel door operation is easy and trouble-free with proper fit and simple checks.
If you are in demand for superior quality and affordable OEM Toyota Sienna Fuel Door Release Cable, then shop with us! We own a wide range of the reduced-priced genuine Toyota Sienna Fuel Door Release Cable. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.
Toyota Sienna Fuel Door Release Cable Parts Questions & Experts Answers
- Q: How to disconnect and replace the fuel door release cable on Toyota Sienna?A:Disconnect the negative battery cable and remove the rear fenderwell liner. Twist the Fuel Door Release Cable end on a quarter-turn counterclockwise and pull it from the fuel door housing. Pry up the driver's side doorsill covers and remove the center door pillar's lower trim panel. Peel back the carpeting to access the release cable and open all of the clips holding the cable to the body. Remove the two screws holding the release handle assembly to the floor and the screw holding the fuel door release assembly to the floor. Turn the housing over and remove the cable housings from the clips and detach the cable eye from the slot in the lever. Attach a piece of thin wire to the end of the cable, then, working in the rear fenderwell, pull the cable towards the rear of the vehicle until the wire is visible. Attach the wire to the front of the new cable and fish it back through the body until it can be attached to the lever, completing the installation in reverse order of removal.
Related Toyota Sienna Parts
Browse by Year
2020 Fuel Door Release Cable 2019 Fuel Door Release Cable 2018 Fuel Door Release Cable 2017 Fuel Door Release Cable 2016 Fuel Door Release Cable 2015 Fuel Door Release Cable 2014 Fuel Door Release Cable 2013 Fuel Door Release Cable 2012 Fuel Door Release Cable 2011 Fuel Door Release Cable 2010 Fuel Door Release Cable 2009 Fuel Door Release Cable 2008 Fuel Door Release Cable 2007 Fuel Door Release Cable 2006 Fuel Door Release Cable 2005 Fuel Door Release Cable 2004 Fuel Door Release Cable 2003 Fuel Door Release Cable 2002 Fuel Door Release Cable 2001 Fuel Door Release Cable 2000 Fuel Door Release Cable 1999 Fuel Door Release Cable 1998 Fuel Door Release Cable