How to remove and install a fender on 2002 through 2008 Toyota Solara?

First, lift the car up, pad it with stands, and take out the front tire. Undo the inner fenderwell screws and clips, then take off both the inner fenderwell and the mud guard by removing bolts at the bottom front of the fenderwell and detaching the center piece using bolts, screws, and plastic connectors. Open your front door and send the upper bolt that connects the fender to the body. Loosen and pull down the panel on the rocker to reach the lower fender bolt. Next, take off the bolts connecting the fender to the rocker and the lower fender. Unfasten and take away the bolts that hold the fender to the body. Remove the rubber strip on top of the fender, the cowl cover over the headlight area, and fasteners connecting the fascia (frame beneath the hood) to the fender. Take off the fender carefully, with help if you can, to stop harmful contact with other car parts. To install the fender correctly, make sure to line up its top with the hood opening and its edge along the front door, then finish putting all the bolts back in.

Genuine Toyota Solara Fender

Wheel Fender

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Fenders found

View related parts
Toyota Solara Front Fender Sub-Assembly Front Hand
Part Number: 53802-06050
$252.82 MSRP: $362.53
You Save: $109.71 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender Sub-Assy, Front LH; Fender
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1999-2003 Toyota Solara | 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.0L | 1MZFE, 2AZFE, 5SFE; ACV20L-GCMNKA, ACV20L-GCPNKA, ACV20L-GCPNKK, ACV20L-GKPNKA, MCV20L-GCMNKA, MCV20L-GCMNKK, MCV20L-GCPNKA, MCV20L-GCPNKK, MCV20L-GKPNKA, MCV20L-GKPNKK, SXV20L-GCMNKA, SXV20L-GCPNKA, SXV20L-GCPNKK, SXV20L-GKPNKA
View related parts
Toyota Solara Front Fender Sub-Assembly Right Hand
Part Number: 53801-AA040
$241.85 MSRP: $346.79
You Save: $104.94 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender Sub-Assy, Front RH; Fender
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2008 Toyota Solara | SE, SLE | 4 Cyl 2.4L, 6 Cyl 3.3L | 2AZFE, 3MZFE; ACV30L-GCAGKA, ACV30L-GCANKA, ACV30L-GCMNKA, ACV30L-GCPGKA, ACV30L-GCPNKA, MCV31L-GCAGKA, MCV31L-GCANKA, MCV31L-GKAGKA, MCV31L-GKANKA
View related parts
Toyota Solara Front Fender Sub-Assembly Front Hand
Part Number: 53802-AA040
$241.85 MSRP: $346.79
You Save: $104.94 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender Sub-Assy, Front LH; Fender
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2008 Toyota Solara | SE, SLE | 4 Cyl 2.4L, 6 Cyl 3.3L | 2AZFE, 3MZFE; ACV30L-GCAGKA, ACV30L-GCANKA, ACV30L-GCMNKA, ACV30L-GCPGKA, ACV30L-GCPNKA, MCV31L-GCAGKA, MCV31L-GCANKA, MCV31L-GKAGKA, MCV31L-GKANKA
View related parts
Toyota Solara Front Fender Sub-Assembly Right Hand
Part Number: 53801-06050
$260.41 MSRP: $373.41
You Save: $113.00 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender Sub-Assy, Front RH; Fender
- Position: Front Passenger Side
- Replaces: 53801-06040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1999-2003 Toyota Solara | 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.0L | 1MZFE, 2AZFE, 5SFE; ACV20L-GCMNKA, ACV20L-GCPNKA, ACV20L-GCPNKK, ACV20L-GKPNKA, MCV20L-GCMNKA, MCV20L-GCMNKK, MCV20L-GCPNKA, MCV20L-GCPNKK, MCV20L-GKPNKA, MCV20L-GKPNKK, SXV20L-GCMNKA, SXV20L-GCPNKA, SXV20L-GCPNKK, SXV20L-GKPNKA
View related parts
Toyota Solara Front Fender Sub-Assembly Front Hand
Part Number: 53802-06070
$286.28 MSRP: $410.50
You Save: $124.22 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender Sub-Assy, Front LH; Fender
- Position: Front Driver Side
- Replaces: 53802-06060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2003 Toyota Solara | 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.0L | 1MZFE, 2AZFE, 5SFE; ACV20L-GCMNKA, ACV20L-GCPNKA, ACV20L-GCPNKK, ACV20L-GKPNKA, MCV20L-GCMNKA, MCV20L-GCMNKK, MCV20L-GCPNKA, MCV20L-GCPNKK, MCV20L-GKPNKA, MCV20L-GKPNKK, SXV20L-GCMNKA, SXV20L-GCPNKA, SXV20L-GCPNKK, SXV20L-GKPNKA
View related parts
Toyota Solara Front Fender Sub-Assembly Right Hand
Part Number: 53801-06070
$277.92 MSRP: $398.52
You Save: $120.60 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fender Sub-Assy, Front RH; Fender
- Position: Front Passenger Side
- Replaces: 53801-06060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2003 Toyota Solara | 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.0L | 1MZFE, 2AZFE, 5SFE; ACV20L-GCMNKA, ACV20L-GCPNKA, ACV20L-GCPNKK, ACV20L-GKPNKA, MCV20L-GCMNKA, MCV20L-GCMNKK, MCV20L-GCPNKA, MCV20L-GCPNKK, MCV20L-GKPNKA, MCV20L-GKPNKK, SXV20L-GCMNKA, SXV20L-GCPNKA, SXV20L-GCPNKK, SXV20L-GKPNKA

Toyota Solara Fender

The Toyota Solara Fender essentially protects your car's front line from rocks, water, and road dirt thrown up by spinning tires. It also cushions light hits. The Fender is made from strong stamped steel or a similar stiff material and surrounds the wheel well so that air glides smoothly over the tire, cutting drag and helping the coupe or convertible maintain its sporty appearance. Throughout its production, different generations of Toyota Solara have generally applied two basic Fender styles, the front quarter panel and rear quarter panel. Although these two designs reflect the body lines of the model year that the Fenders are made for, both serve the same purpose of protection. The front parts usually get the first chips as these are always close to the ground. Rear parts mainly get slush and salt thrown backward. The first-gen bodies span 1999-2003 and the second-gen 2004-2008 options have similar styling, but the main distinction lies where it matters, the mounting points as well as contours. As such, each year range requires a matching Fender. Before placing an order, clients should always confirm the specific Toyota Solara build year due to structural edge ties from proper fit. In order to maintain the paint, prevent corrosion, and keep the smooth factory aerodynamics designed for the model, each Fender must be straight, rust-free, and dent-free.

If you are in demand for superior quality and affordable OEM Toyota Solara Fender, then shop with us! We own a wide range of the reduced-priced genuine Toyota Solara Fender. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Solara Fender Parts Questions & Experts Answers

Front Fender Sub-Assembly Right Hand
53801-06050
Q: How to remove and install a fender on 2002 through 2008 Toyota Solara?
A:
First, lift the car up, pad it with stands, and take out the front tire. Undo the inner fenderwell screws and clips, then take off both the inner fenderwell and the mud guard by removing bolts at the bottom front of the fenderwell and detaching the center piece using bolts, screws, and plastic connectors. Open your front door and send the upper bolt that connects the fender to the body. Loosen and pull down the panel on the rocker to reach the lower fender bolt. Next, take off the bolts connecting the fender to the rocker and the lower fender. Unfasten and take away the bolts that hold the fender to the body. Remove the rubber strip on top of the fender, the cowl cover over the headlight area, and fasteners connecting the fascia (frame beneath the hood) to the fender. Take off the fender carefully, with help if you can, to stop harmful contact with other car parts. To install the fender correctly, make sure to line up its top with the hood opening and its edge along the front door, then finish putting all the bolts back in.