How to remove and install the trunk lid latch and trunk lock cylinder on 2002 through 2008 Toyota Solara?

In order to replace the trunk lid latch, first, one must take out the trim panel by unscrewing the plastic fasteners that are positioned around the cope of the panel. Subsequently, make a mark around the trunk lid latch assembly, and unbolt the two latching assembly mounting bolts, disconnect the electrical connection, and then sever the lock cylinder rod connection. Next, unscrew the two receding bolts to pull off the latch off from its position. If required, sever the electrical connection or detach the terminal of the latch release cable or the actuator rod or rods from the latch. For the trunk lock cylinder, with the trunk unlocked, pull the handle and open the trunk; Now you remove the screws and the trunk lid trim panel. Locate and pull out the lock cylinder rod from the clip, and also pull out the lock cylinder mounting bolts and, if necessary, the electrical connection of the lock. Last, take out the cylinder from the trunk, and configuration procedure is the opposite of the disassembly one for both components.

Genuine Toyota Solara Trunk Lid Latch

Luggage Compartment Door Lock Assembly

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Trunk Lid Latches found

View related parts
Toyota Solara Luggage Compartment Door Lock Assembly
Part Number: 64610-AA050
$83.77 MSRP: $118.08
You Save: $34.31 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Luggage Compartment Door; Lock, Lock Assembly
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2003 Toyota Solara | 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.0L | 1MZFE, 2AZFE, 5SFE; ACV20L-GCMNKA, ACV20L-GCPNKA, ACV20L-GCPNKK, ACV20L-GKPNKA, MCV20L-GCMNKA, MCV20L-GCMNKK, MCV20L-GCPNKA, MCV20L-GCPNKK, MCV20L-GKPNKA, MCV20L-GKPNKK, SXV20L-GCMNKA, SXV20L-GCPNKA, SXV20L-GCPNKK, SXV20L-GKPNKA
View related parts
Toyota Solara Luggage Compartment Door Lock Assembly
Part Number: 64600-AA010
$269.80 MSRP: $386.88
You Save: $117.08 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Luggage Compartment Door; Lock, Lock Assembly
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2008 Toyota Solara | SE, SLE | 4 Cyl 2.4L, 6 Cyl 3.3L | 2AZFE, 3MZFE; ACV30L-GCAGKA, ACV30L-GCANKA, ACV30L-GCMNKA, ACV30L-GCPGKA, ACV30L-GCPNKA, MCV31L-GCAGKA, MCV31L-GCANKA, MCV31L-GKAGKA, MCV31L-GKANKA
View related parts
Toyota Solara Luggage Compartment Door Lock Assembly
Part Number: 64600-AA030
$227.35 MSRP: $326.00
You Save: $98.65 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Luggage Compartment Door; Lock, Lock Assembly
- Manufacturer Note: W(POWER LUGGAGE COMPARTMENT DOOR OPENER)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2003 Toyota Solara | 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.0L | 1MZFE, 2AZFE, 5SFE; ACV20L-GCMNKA, ACV20L-GCPNKA, ACV20L-GCPNKK, ACV20L-GKPNKA, MCV20L-GCMNKA, MCV20L-GCMNKK, MCV20L-GCPNKA, MCV20L-GCPNKK, MCV20L-GKPNKA, MCV20L-GKPNKK, SXV20L-GCMNKA, SXV20L-GCPNKA, SXV20L-GCPNKK, SXV20L-GKPNKA
View related parts
Toyota Solara Luggage Compartment Door Lock Assembly
Part Number: 64610-AA020
Product Specifications
- Other Name: Lock Assy, Luggage Compartment Door; Lock, Lock Assembly
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1999-2001 Toyota Solara | 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.0L | 1MZFE, 2AZFE, 5SFE; ACV20L-GCMNKA, ACV20L-GCPNKA, ACV20L-GCPNKK, ACV20L-GKPNKA, MCV20L-GCMNKA, MCV20L-GCMNKK, MCV20L-GCPNKA, MCV20L-GCPNKK, MCV20L-GKPNKA, MCV20L-GKPNKK, SXV20L-GCMNKA, SXV20L-GCPNKA, SXV20L-GCPNKK, SXV20L-GKPNKA

Toyota Solara Trunk Lid Latch

The Trunk Lid Latch in Toyota Solara vehicles is an important part that locks and holds the trunk lid in place so as to prevent its opening during the drive or whenever there are goods in the boot. This works much like a seat belt, one has to pull to unlock it, in this case to allow the two halves to separate. Made from high impact and high strength material such as stainless steel the Trunk Lid Latch is made to withstand strong winds and avoid accidental openings that may cause the cargo to be lost. As earlier noted, several kinds of trunk latches could have been fitted to Toyota Solara in the past although the individual ones are not described. The main emphasis is observed on the reliability of the latch and its ability to protect the content of the trunk. Because of this, the maintenance is critical, as damaged or faulty latches will represent a threat to the security of an access control system and the smooth operations of the doors; it is thus critical for replacements to be done on time.

If you are in demand for superior quality and affordable OEM Toyota Solara Trunk Lid Latch, then shop with us! We own a wide range of the reduced-priced genuine Toyota Solara Trunk Lid Latch. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Solara Trunk Lid Latch Parts Questions & Experts Answers

Luggage Compartment Door Lock Assembly
64600-AA030
Q: How to remove and install the trunk lid latch and trunk lock cylinder on 2002 through 2008 Toyota Solara?
A:
In order to replace the trunk lid latch, first, one must take out the trim panel by unscrewing the plastic fasteners that are positioned around the cope of the panel. Subsequently, make a mark around the trunk lid latch assembly, and unbolt the two latching assembly mounting bolts, disconnect the electrical connection, and then sever the lock cylinder rod connection. Next, unscrew the two receding bolts to pull off the latch off from its position. If required, sever the electrical connection or detach the terminal of the latch release cable or the actuator rod or rods from the latch. For the trunk lock cylinder, with the trunk unlocked, pull the handle and open the trunk; Now you remove the screws and the trunk lid trim panel. Locate and pull out the lock cylinder rod from the clip, and also pull out the lock cylinder mounting bolts and, if necessary, the electrical connection of the lock. Last, take out the cylinder from the trunk, and configuration procedure is the opposite of the disassembly one for both components.