How to remove and reinstall the inlet manifold?

The Intake Manifold is made of plastic, so avoid striking it or using excessive force during removal. To begin, drain the cooling system and remove the throttle body and coolant filler neck (on later models). Set aside the engine oil dipstick. Remove the nuts securing the wiring harness brackets and lift the harness clear. Unclip the wiring harness from the side of the manifold. Disconnect the breather hose and brake servo vacuum hose from the ports on the inlet manifold. On early models, disconnect the hoses from the coolant filler neck and remove it. Remove the three central bolts and two end nuts to withdraw the manifold from the cylinder head. Remember to use a new one-piece gasket when refitting and ensure the mating faces are clean. Finally, tighten the inlet manifold nuts and bolts to the specified torque.

Genuine Toyota Yaris Intake Manifold

Engine Intake Manifold

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

3 Intake Manifolds found

View related parts
Toyota Yaris Manifold, Intake
Part Number: 17101-21080
- Other Name: Intake Manifold
$127.81 MSRP: $181.70
You Save: $53.89 (30%)

Add to Cart
More Info
Fits the following Vehicles:
2006-2018 Toyota Yaris | RS, STD | 4 Cyl 1.5L | 1NZFE; 1NZFE; NCP131L-AGMRKA, NCP131L-AGMRKK, NCP131L-AGMVKK, NCP131L-AGPRKA, NCP131L-AGPRKK, NCP131L-AGPVKK, NCP131L-AHMRKA, NCP131L-AHMRKK, NCP131L-AHMVKK, NCP131L-AHPRKA, NCP131L-AHPRKK, NCP131L-AHPVKK, NCP131L-CGMRKA, NCP131L-CGMRKK, NCP131L-CGMSKK, NCP131L-CGPRKA, NCP131L-CGPRKK, NCP131L-CGPSKK, NCP131L-CHMRKA, NCP131L-CHMRKK, NCP131L-CHMSKK, NCP131L-CHPRKA, NCP131L-CHPRKK, NCP131L-CHPSKK, NCP91L-AGMRKA, NCP91L-AGMRKK, NCP91L-AGMVKK, NCP91L-AGPRKA, NCP91L-AGPRKK, NCP91L-AGPVKK, NCP91L-AHMRKA, NCP91L-AHMRKK, NCP91L-AHMVKK, NCP91L-AHPRKA, NCP91L-AHPRKK, NCP91L-AHPVKK, NCP93L-BEMRKA, NCP93L-BEMRKK, NCP93L-BEPRKA, NCP93L-BEPRKK
Less Info
View related parts
Toyota Yaris Manifold Assembly, INTAK
Part Number: 17120-WB001
- Other Name: Manifold, Intake
$537.80 MSRP: $791.63
You Save: $253.83 (33%)

Add to Cart
More Info
Fits the following Vehicles:
2019-2020 Toyota Yaris | Base, Entry, High | P5 | P5; P5; DADW-NAA, DADW-NAB, DADW-NAC, DAEA-NAA, DAEA-NAB, DAEA-NAC, DAEA-NAD, DAEA-NAE, DAEB-NAC, DAEC-NAC, DAEC-NAD, DAEC-NAE, DAEC-NAF, DAED-NAA, DAEE-NAA, DAEE-NAB, DDF4-NAA, DDF4-NAB, DDF4-NAC, DDF4-NAD, DDF5-NAA, DDF5-NAB, DDF5-NAC, DDF5-NAD, DDF5-NAE, DDF5-NAF, DDF5-NAG, DDF8-NAA, DDF9-NAA, DDF9-NAB, DM0S-NAA, DM0S-NAB, DM0S-NAC, DM0T-NAA, DM0T-NAB, DM0T-NAC, DM0T-NAD, DM0T-NAE, DM0V-NAA, DM0W-NAA, DM0W-NAB
Less Info
View related parts
Toyota Yaris Manifold Assembly, INTAK
Part Number: 17120-WB002
- Other Name: Intake Manifold
$269.28 MSRP: $386.12
You Save: $116.84 (31%)

Add to Cart
More Info
Fits the following Vehicles:
2019-2020 Toyota Yaris | Base, Entry, High | P5 | P5; P5; DADW-NAA, DADW-NAB, DADW-NAC, DAEA-NAA, DAEA-NAB, DAEA-NAC, DAEA-NAD, DAEA-NAE, DAEB-NAC, DAEC-NAC, DAEC-NAD, DAEC-NAE, DAEC-NAF, DAED-NAA, DAEE-NAA, DAEE-NAB
Less Info

Toyota Yaris Intake Manifold Parts Questions & Answers

Manifold, Intake
17101-21080
Q: How to remove and reinstall the inlet manifold?
A: The Intake Manifold is made of plastic, so avoid striking it or using excessive force during removal. To begin, drain the cooling system and remove the throttle body and coolant filler neck (on later models). Set aside the engine oil dipstick. Remove the nuts securing the wiring harness brackets and lift the harness clear. Unclip the wiring harness from the side of the manifold. Disconnect the breather hose and brake servo vacuum hose from the ports on the inlet manifold. On early models, disconnect the hoses from the coolant filler neck and remove it. Remove the three central bolts and two end nuts to withdraw the manifold from the cylinder head. Remember to use a new one-piece gasket when refitting and ensure the mating faces are clean. Finally, tighten the inlet manifold nuts and bolts to the specified torque.