How to replace Rack and Pinion Boot on Toyota Yaris?

Remove the relevant tie-rod end, then take off the inboard and outboard securing clips before sliding the Rack and Pinion Boot off the end of the tie-rod. Clean the tie-rod thoroughly and slide the new boot into position. Fit the boot securing clips, using new clips if necessary, ensuring that the boot is not twisted. Finally, reattach the tie-rod end.

Genuine Toyota Yaris Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Rack and Pinion Boots found

View related parts
Toyota Yaris Steering Rack Boot Set
Part Number: 45535-59035
$22.72 MSRP: $31.75
You Save: $9.03 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot, Steering Rack, NO.2; Boot, Boot Kit, Tie Rod Boot
- Replaces: 45535-59015
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2006-2016 Toyota Yaris | RS, STD | 4 Cyl 1.5L | 1NZFE; NCP131L-AGMRKA, 1NZFE; NCP91L-AGMRKA, NCP131L-AGMRKK, NCP131L-AGMVKK, NCP131L-AGPRKA, NCP131L-AGPRKK, NCP131L-AGPVKK, NCP131L-AHMRKA, NCP131L-AHMRKK, NCP131L-AHMVKK, NCP131L-AHPRKA, NCP131L-AHPRKK, NCP131L-AHPVKK, NCP131L-CGMRKA, NCP131L-CGMRKK, NCP131L-CGMSKK, NCP131L-CGPRKA, NCP131L-CGPRKK, NCP131L-CGPSKK, NCP131L-CHMRKA, NCP131L-CHMRKK, NCP131L-CHMSKK, NCP131L-CHPRKA, NCP131L-CHPRKK, NCP131L-CHPSKK, NCP91L-AGMRKA, NCP91L-AGMRKK, NCP91L-AGMVKK, NCP91L-AGPRKA, NCP91L-AGPRKK, NCP91L-AGPVKK, NCP91L-AHMRKA, NCP91L-AHMRKK, NCP91L-AHMVKK, NCP91L-AHPRKA, NCP91L-AHPRKK, NCP91L-AHPVKK, NCP93L-BEMRKA, NCP93L-BEMRKK, NCP93L-BEPRKA, NCP93L-BEPRKK
View related parts
Toyota Yaris Steering Rack Boot
Part Number: 45535-59015
$22.72 MSRP: $31.75
You Save: $9.03 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot, Steering Rack, NO.1
- Replaced by: 45535-59035
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2006-2012 Toyota Yaris | RS, STD | 4 Cyl 1.5L | 1NZFE; NCP91L-AGMRKA, NCP91L-AGMRKK, NCP91L-AGMVKK, NCP91L-AGPRKA, NCP91L-AGPRKK, NCP91L-AGPVKK, NCP91L-AHMRKA, NCP91L-AHMRKK, NCP91L-AHMVKK, NCP91L-AHPRKA, NCP91L-AHPRKK, NCP91L-AHPVKK, NCP93L-BEMRKA, NCP93L-BEMRKK, NCP93L-BEPRKA, NCP93L-BEPRKK
View related parts
Toyota Yaris Steering Rack Boot
Part Number: 45535-09240
$22.69 MSRP: $31.72
You Save: $9.03 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot, Steering Rack, NO.2; Boot Kit, Tie Rod Boot
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2015-2018 Toyota Yaris | 4 Cyl 1.5L | 1NZFE; NCP131L-CGMRKA, NCP131L-CGMRKK, NCP131L-CGMSKK, NCP131L-CGPRKA, NCP131L-CGPRKK, NCP131L-CGPSKK, NCP131L-CHMRKA, NCP131L-CHMRKK, NCP131L-CHMSKK, NCP131L-CHPRKA, NCP131L-CHPRKK, NCP131L-CHPSKK
View related parts
Toyota Yaris Steering Rack Boot
Part Number: 45535-WB001
$30.48 MSRP: $42.60
You Save: $12.12 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot, Steering Rack, NO.1; Boot Kit, Tie Rod Boot
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2020 Toyota Yaris | Base, Entry, High | P5 | P5; DADW-NAA, DADW-NAB, DADW-NAC, DAEA-NAA, DAEA-NAB, DAEA-NAC, DAEA-NAD, DAEA-NAE, DAEB-NAC, DAEC-NAC, DAEC-NAD, DAEC-NAE, DAEC-NAF, DAED-NAA, DAEE-NAA, DAEE-NAB, DDF4-NAA, DDF4-NAB, DDF4-NAC, DDF4-NAD, DDF5-NAA, DDF5-NAB, DDF5-NAC, DDF5-NAD, DDF5-NAE, DDF5-NAF, DDF5-NAG, DDF8-NAA, DDF9-NAA, DDF9-NAB, DM0S-NAA, DM0S-NAB, DM0S-NAC, DM0T-NAA, DM0T-NAB, DM0T-NAC, DM0T-NAD, DM0T-NAE, DM0V-NAA, DM0W-NAA, DM0W-NAB

Toyota Yaris Rack and Pinion Boot

The Toyota Yaris Rack and Pinion Boot looks at one of the carmaker's pride and joy, the Yaris, and Toyota's dedication of delivering a car that is both reliable and a performer. This is an important rubber boot because it shields the steering rack from grime and any debris whereby the internal parts of the steering system will be flawless and functional. Rack and Pinion Boot plays a crucial role in the Yaris model's longevity as any damage is likely to increase its exposure and possible failure of the steering system. Available for the Yaris model produced in 1999 up to the new ones, the Toyota Yaris Rack and Pinion Boot preserves the soundness of the steering mechanism irrespective of a car's trim level or powertrain. It plays a very important role as far as efficiency and safety is concerned since it eliminates chances of contamination of the steering wheel and its smoothness is important for the driver to have control over the vehicle. Furthermore, the Toyota Yaris Rack and Pinion Boot is an automobile component relatively unique to the market of automobiles as it is famously known to be strong and highly importantly, reliable, which is a virtue that is championed by Toyota automobiles. That is why the Rack and Pinion Boot brings a lot into the Yaris's performance not only reinforcing Toyota's commitment of build cars that will offers the optimal experience to the drivers, but also offering the optimal safety that vehicles could bring.

If you are in demand for superior quality and affordable OEM Toyota Yaris Rack and Pinion Boot, then shop with us! We own a wide range of the reduced-priced genuine Toyota Yaris Rack and Pinion Boot. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Yaris Rack and Pinion Boot Parts Questions & Experts Answers

Steering Rack Boot
45535-59015
Q: How to replace Rack and Pinion Boot on Toyota Yaris?
A:
Remove the relevant tie-rod end, then take off the inboard and outboard securing clips before sliding the Rack and Pinion Boot off the end of the tie-rod. Clean the tie-rod thoroughly and slide the new boot into position. Fit the boot securing clips, using new clips if necessary, ensuring that the boot is not twisted. Finally, reattach the tie-rod end.