Toyota 88320-02120 Compressor Assy, Cooler

You can Select Your Vehicle to check if 88320-02120 fits your vehicle.

To remove the compressor, the refrigerant must first be recovered and the battery cable disconnected. The front of the vehicle should be raised and supported on jack stands, and the engine under cover and drive belt removed. The wiring connector and refrigerant lines should be detached, and the compressor unbolted and lifted from the vehicle. When installing a new compressor, O-rings specifically made for R-134a refrigerant should be used and lubricated with the same oil. The system should then be evacuated, recharged, and leak tested. Saved 85 words To remove the compressor, the refrigerant must first be recovered and the battery cable disconnected. The front of the vehicle should be raised and supported on jack stands, and the engine under cover and drive belt removed. The wiring connector and refrigerant lines should be detached, and the compressor unbolted and lifted from the vehicle. When installing a new compressor, O-rings specifically made for R-134a refrigerant should be used and lubricated with the same oil. The system should then be evacuated, recharged, and leak tested. Premium suggestions We found 4 additional writing issues in this text available only for Premium users. 3 Passive voice misuse 1 Unclear sentences 4 It's an online service that quickly and easily makes your writing better and makes you sound like a pro, or at least helps you avoid looking like a fool. Saved 85 words To remove the compressor, the refrigerant must first be recovered and the battery cable disconnected. The front of the vehicle should be raised and supported on jack stands, and the engine under cover and drive belt removed. The wiring connector and refrigerant lines should be detached, and the compressor unbolted and lifted from the vehicle. When installing a new compressor, O-rings specifically made for R-134a refrigerant should be used and lubricated with the same oil. The system should then be evacuated, recharged, and leak tested. Premium suggestions We found 4 additional writing issues in this text available only for Premium users. 3 Passive voice misuse 1 Unclear sentences 4 It's an online service that quickly and easily makes your writing better and makes you sound like a pro, or at least helps you avoid looking like a fool.

To remove the compressor, the refrigerant must be discharged and the negative cable disconnected from the battery. The front of the vehicle should be raised and supported on jack stands, and the engine under cover (if equipped) should be removed. The drive belt from the compressor should also be removed, followed by detaching the wiring connector and disconnecting the refrigerant lines. Finally, the compressor can be unbolted and lifted from the vehicle. To install a new or rebuilt compressor, follow the directions supplied with the compressor regarding the proper level of oil prior to installation. Replace any O-rings with new ones specifically made for R-134a refrigerant and lubricate them with the same oil. Finally, have the system evacuated, recharged, and leak tested.