Toyota 88460-06050 Condenser

To remove the A/C Condenser, start by discharging the refrigerant and removing the radiator upper mounts. Unbolt and set aside the right-hand underhood electrical relay box for clearance. Then, remove the A/C Accumulator and disconnect the inlet and outlet fittings, making sure to cap the open fittings immediately to prevent moisture and dirt from entering the system. Finally, remove the mounting nuts and push the radiator back toward the engine, followed by pushing the condenser rearward until it's free of the radiator support and can be pulled up and out of the vehicle. To install the condenser, brackets, and bolts, ensure that the rubber cushions fit properly on the mounting points. Reconnect the refrigerant lines, using new O-rings where necessary. Lastly, reinstall the remaining parts in the reverse order of removal and have the system evacuated, charged, and leak tested.