Toyota 16210-62011 Coupling Assembly, Fluid

You can Select Your Vehicle to check if 16210-62011 fits your vehicle.

Check the cooling fan assembly carefully for cracks, especially around the base of each blade. If any cracks are evident, replace the cooling fan assembly. Check the fan clutch for fluid leakage. If it's leaking, replace it. Try to move the fan blades in a front-to- rear direction. If they wobble, replace the fan clutch. Spin the fan by hand. It should resist spinning (more resistance when the engine is hot). If it spins freely, or won't spin at all, replace the fan clutch. Remove the fan shroud mounting bolts. It will be necessary to remove the lower fan shroud first, before removing the main fan shroud. Remove the radiator mounting bolts. Remove the fan clutch-to-water pump mounting nuts and separate the fan from the water pump. Lift the fan and shroud from the engine compartment. To separate the fan blades from the viscous clutch hub, remove the mounting nuts. Installation is the reverse of removal.