Toyota 45046-09560 Tie Rod End Sub-Assembly, Right

You can Select Your Vehicle to check if 45046-09560 fits your vehicle.

Loosen the wheel lug nuts, raise the vehicle and place it securely on jackstands. Remove the wheel. Loosen the tie-rod end locknut and mark the position of the tie-rod end on the threaded portion of the tie-rod. Remove the cotter pin and loosen the castle nut from the tie-rod end balljoint stud, then install a puller and separate the tie-rod end from the steering knuckle. Remove the nut and detach the tie-rod end from the steering knuckle arm. Unscrew the old tie-rod end and install the new one. Make sure the new tie-rod end is aligned with the mark you made on the threads of the tie-rod. Installation is the reverse of removal. Tighten the tie-rod end balljoint nut. Tighten the locknut securely. Tighten the lug nuts.