Toyota 31310-34010 Pedal Sub-Assy, Clutch

Remove any floor mats or carpeting to expose the sound deadener material. With the clutch pedal at its normal (released) height, measure the distance from the floor to the pedal and compare your measurement. If the pedal height is incorrect, remove the lower finish panel(s) and adjust pedal height by loosening the locknut and turning the adjustment bolt located at the top of the pedal. Once the pedal height is correct, tighten the locknut securely. Depress the clutch pedal to the point at which you feel initial resistance, measure the distance from the floor to the pedal and compare your measurement. If the pedal freeplay is incorrect, remove the lower finish panel(s) and adjust pedal freeplay by loosening the pushrod locknut and turning the pushrod until pedal freeplay is correct. Once the pedal freeplay is correct, tighten the locknut securely. After adjusting pedal freeplay, check pedal height again and make sure that it's still within the specified range of adjustment. Check and, if necessary, adjust the clutch start switch.