Toyota 85214-22440 Rear Wiper Rubber

You can Select Your Vehicle to check if 85214-22440 fits your vehicle.

The windshield wiper and blade assembly should be inspected periodically for damage, loose components and cracked or worn blade elements. Road film can build up on the wiper blades and affect their efficiency, so they should be washed regularly with a mild detergent solution. The action of the wiping mechanism can loosen bolts, nuts and fasteners, so they should be checked and tightened, as necessary. Pry open the trim cap and check the tightness of the wiper arm retaining nut, at the same time the wiper blades are checked. If the wiper blade elements are cracked, worn or warped, or no longer clean adequately, they should be replaced with new ones. Lift the arm assembly away from the glass for clearance, press on the release lever, then slide the wiper blade assembly out of the hook in the end of the arm. Press on the release tab, then push the blade assembly down and out of the hook in the arm. Use needle-nose pliers to compress the blade element, then slide the element out of the frame and discard it. Use needle-nose pliers to compress the rubber element, then slide the element out - slide the new element in and lock the blade assembly fingers into the notches of the wiper element. Installation is the reverse of removal.