Toyota 04495-08010 Shoe Kit, Rear Brake

Install the brake drum on the axle flange.

Follow the accompanying illustrations for the brake shoe replacement procedure, which includes: - Removing the rear parking brake shoe return spring from the anchor pin and unhooking it from the rear shoe. - Removing the front parking brake shoe return spring from the anchor pin and unhooking it from the front shoe. - Removing the rear shoe hold-down spring and pulling out the pin. - Removing the shoe strut from between the shoes. - Removing the front shoe hold-down spring and pulling out the pin. - Removing the adjuster and the tension spring. - Popping the C-washer off the pivot pin on the back of the rear shoe and pulling the parking brake lever off the pivot pin. - Applying a thin coat of high-temperature grease to the contact surfaces of the backing plate. - Sliding the parking brake lever onto the pivot pin and installing a new C-washer. - Attaching the tension spring to the back side of the rear shoe and to the back side of the front shoe. - Flipping the shoes around and installing the adjuster, ensuring both ends are properly engaged with the shoes. - Placing the shoes in position and installing the strut and spring, ensuring the ends of the strut are properly engaged with the shoes. - Installing the front shoe return spring and the rear shoe return spring. - Installing the rear shoe hold-down spring and the front shoe hold-down spring. - Ensuring the parking brake assembly looks correct when finished.