Toyota 84520-24010 Switch Assy, Clutch Start

You can Select Your Vehicle to check if 84520-24010 fits your vehicle.

The Park/Neutral position switch is responsible for preventing the engine from starting in any gear other than Park or Neutral. If the engine starts in a different position, it may indicate an issue with the switch. To check the switch, raise the vehicle and secure it on jackstands. Unplug the electrical connector from the switch and use an ohmmeter to test the continuity across the indicated terminals. If the switch does not operate correctly, try adjusting it and retest. If it still fails, it should be replaced. To adjust the switch, place the shift lever in Neutral and loosen the switch retaining bolt. Align the groove and neutral basic line, then tighten the bolt while holding the switch in position. For replacement, follow the specific steps for your vehicle model, which may include removing the exhaust pipe and heat shield or detaching oil cooler pipes. Unplug the electrical connector, remove the lock washer and nut, and then remove the retaining bolt to take out the switch. Installation is the reverse of removal, ensuring proper adjustment and continuity testing.