My Garage
My Account
Cart
Genuine 1986 Toyota MR2 Fuel Tank
Gas Tank- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Fuel Tanks found
Product Specifications- Other Name: Tank Assy, Fuel; Fuel Tank, Tank
- Part Name Code: 77100
- Item Weight: 28.70 Pounds
- Item Dimensions: 36.3 x 30.7 x 12.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 77001-19366
- Warranty: This genuine Toyota part is covered by warranty.
- Product Specifications
- Other Name: Tank Assy, Fuel
- Part Name Code: 77100
- Item Weight: 29.70 Pounds
- Item Dimensions: 36.3 x 30.1 x 11.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 77001-19475
- Warranty: This genuine Toyota part is covered by warranty.
- Product Specifications
- Part Name Code: 77100
- Item Weight: 27.90 Pounds
- Item Dimensions: 37.7 x 30.4 x 12.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 77001-19465
- Warranty: This genuine Toyota part is covered by warranty.
- Product Specifications
- Other Name: Fuel Tank, Tank
- Part Name Code: 77100
- Item Weight: 29.50 Pounds
- Item Dimensions: 36.7 x 31.0 x 11.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 77001-19505
- Warranty: This genuine Toyota part is covered by warranty.
1986 Toyota MR2 Fuel Tank
With ToyotaPartsDeal.com, you have access to an extensive inventory of genuine 1986 Toyota MR2 Fuel Tank, all priced competitively. Feel secure in your purchase, as all our OEM 1986 Toyota MR2 Fuel Tank are covered by warranty. Plus, we offer a hassle-free return policy and speedy delivery service.
1986 Toyota MR2 Fuel Tank Parts Questions & Experts Answers
- Q:How to remove the fuel tank for the 1986 Toyota MR2?Posted by Kaitlyn D.A:Relieve the fuel pressure and then disconnect the cable from the negative terminal of the battery. Remove the console and disconnect the electrical connectors for the fuel pump and the fuel gauge sending unit, ensuring to push the connectors and their pigtails through the rubber grommet before removing the fuel tank. Raise the vehicle and secure it on jackstands, then remove the fuel tank protectors, which are the louvered plastic panels bolted to the underside of the vehicle. Disconnect the right parking brake cable bracket from the middle crossmember, slide the cable grommet out of the bracket, and disconnect the right parking brake cable from the equalizer. Remove the parking brake cable support bracket bolts and the middle crossmember bolts, allowing the bracket and crossmember to hang to one side from the remaining parking brake cable. Disconnect the speedometer cable/throttle cable support bracket bolt. Locate the fuel tank filler neck hose and the breather hose at the rear of the fuel tank in the lower front part of the engine compartment, loosen the fuel tank filler hose clamp and the breather hose clamp, and detach the hoses from the fuel tank. Disconnect the fuel feed and return lines, identifying the fuel feed line by its threaded fitting and the return line located above it. Immediately above these lines are the fuel evaporative separator hoses; loosen the hose clamps and detach them. Remove the fuel tank support strap bolts and take the tank out of the vehicle. Installation is the reverse of removal, ensuring to tighten the fuel tank support strap bolts and the fuel feed line threaded fitting to the specified torque.Answered by Toyota Parts Specialist Jerry / Mar 15, 2026
Related 1986 Toyota MR2 Parts
1986 Toyota MR2 Fuel Filter
1986 Toyota MR2 Fuel Pump
1986 Toyota MR2 Fuel Pressure Regulator
1986 Toyota MR2 Gas Cap
1986 Toyota MR2 Fuel Door Release Cable
1986 Toyota MR2 Fuel Filler Neck
1986 Toyota MR2 Fuel Tank Strap