How to remove the flywheel/driveplate on Four cylinder engine in a 2001 Toyota Solara?

To remove the flywheel/driveplate, first raise the vehicle and support it on jackstands. Remove the transaxle and replace the front pump seal/o-ring if necessary. For manual transaxle equipped vehicles, remove the pressure plate and clutch disc, and check/replace the clutch components and pilot bearing. Make alignment marks on the flywheel/driveplate and crankshaft. Remove the bolts securing the flywheel/driveplate to the crankshaft, using a screwdriver to jam the flywheel if needed. Support the flywheel while removing the last bolt and keep the spacers with the driveplate for automatic transaxle equipped vehicles. To install the flywheel/driveplate, clean it and inspect for any damage. Clean and inspect the mating surfaces of the flywheel/driveplate and crankshaft. Position the flywheel/driveplate against the crankshaft, aligning the marks made during removal. Apply thread locking compound to the bolt threads before tightening them in a criss-cross pattern. The remaining installation steps are the reverse of the removal procedure.

Genuine 2001 Toyota Solara Flywheel

Clutch Flywheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Flywheels found

View related parts
2001 Toyota Solara FLYWHEEL Sub-Assembly
Part Number: 13405-28020
$390.56 MSRP: $574.91
You Save: $184.35 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel Sub-Assy; Flywheel
- Part Name Code: 13405
- Item Weight: 20.00 Pounds
- Item Dimensions: 14.1 x 13.8 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 13405-28020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Solara Submodels:
- SE, SLE | 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.3L | 1MZFE, 2AZFE, 3MZFE, 5SFE; ACV20L-GCMNKA, ACV20L-GCPNKA, ACV20L-GCPNKK, ACV20L-GKPNKA, ACV30L-GCAGKA, ACV30L-GCANKA, ACV30L-GCMNKA, ACV30L-GCPGKA, ACV30L-GCPNKA, MCV20L-GCMNKA, MCV20L-GCMNKK, MCV20L-GCPNKA, MCV20L-GCPNKK, MCV20L-GKPNKA, MCV20L-GKPNKK, MCV31L-GCAGKA, MCV31L-GCANKA, MCV31L-GKAGKA, MCV31L-GKANKA, SXV20L-GCMNKA, SXV20L-GCPNKA, SXV20L-GCPNKK, SXV20L-GKPNKA
View related parts
2001 Toyota Solara FLYWHEEL Sub-Assembly
Part Number: 13405-74120
$421.82 MSRP: $620.91
You Save: $199.09 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel Sub-Assy; Flywheel
- Manufacturer Note: (J)
- Replaces: 13405-74031, 13405-03010
- Part Name Code: 13405
- Item Weight: 20.10 Pounds
- Item Dimensions: 14.2 x 13.6 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 13405-74120
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Solara Submodels:
- 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.0L | 1MZFE, 2AZFE, 5SFE; ACV20L-GCMNKA, ACV20L-GCPNKA, ACV20L-GCPNKK, ACV20L-GKPNKA, MCV20L-GCMNKA, MCV20L-GCMNKK, MCV20L-GCPNKA, MCV20L-GCPNKK, MCV20L-GKPNKA, MCV20L-GKPNKK, SXV20L-GCMNKA, SXV20L-GCPNKA, SXV20L-GCPNKK, SXV20L-GKPNKA
View related parts
2001 Toyota Solara FLYWHEEL Sub-Assembly
Part Number: 13405-03010
$421.82 MSRP: $620.91
You Save: $199.09 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel Sub-Assy
- Manufacturer Note: (L)
- Replaced by: 13405-74120
- Part Name Code: 13405
- Item Weight: 20.80 Pounds
- Item Dimensions: 14.0 x 13.7 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 13405-03010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Solara Submodels:
- 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.0L | 1MZFE, 2AZFE, 5SFE; ACV20L-GCMNKA, ACV20L-GCPNKA, ACV20L-GCPNKK, ACV20L-GKPNKA, MCV20L-GCMNKA, MCV20L-GCMNKK, MCV20L-GCPNKA, MCV20L-GCPNKK, MCV20L-GKPNKA, MCV20L-GKPNKK, SXV20L-GCMNKA, SXV20L-GCPNKA, SXV20L-GCPNKK, SXV20L-GKPNKA
View related parts
2001 Toyota Solara FLYWHEEL Sub-Assembly
Part Number: 13405-62020
$472.62 MSRP: $695.70
You Save: $223.08 (33%)
Product Specifications
- Other Name: Flywheel Sub-Assy; Flywheel
- Part Name Code: 13405
- Item Weight: 20.10 Pounds
- Item Dimensions: 19.9 x 14.0 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 13405-62020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Solara Submodels:
- 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.0L | 1MZFE, 2AZFE, 5SFE; ACV20L-GCMNKA, ACV20L-GCPNKA, ACV20L-GCPNKK, ACV20L-GKPNKA, MCV20L-GCMNKA, MCV20L-GCMNKK, MCV20L-GCPNKA, MCV20L-GCPNKK, MCV20L-GKPNKA, MCV20L-GKPNKK, SXV20L-GCMNKA, SXV20L-GCPNKA, SXV20L-GCPNKK, SXV20L-GKPNKA

2001 Toyota Solara Flywheel

With ToyotaPartsDeal.com, you have access to an extensive inventory of genuine 2001 Toyota Solara Flywheel, all priced competitively. Feel secure in your purchase, as all our OEM 2001 Toyota Solara Flywheel are covered by the manufacturer's warranty. Plus, we offer a hassle-free return policy and speedy delivery service.

2001 Toyota Solara Flywheel Parts Questions & Experts Answers

Q: How to remove the flywheel/driveplate on Four cylinder engine in a 2001 Toyota Solara?
A: To remove the flywheel/driveplate, first raise the vehicle and support it on jackstands. Remove the transaxle and replace the front pump seal/o-ring if necessary. For manual transaxle equipped vehicles, remove the pressure plate and clutch disc, and check/replace the clutch components and pilot bearing. Make alignment marks on the flywheel/driveplate and crankshaft. Remove the bolts securing the flywheel/driveplate to the crankshaft, using a screwdriver to jam the flywheel if needed. Support the flywheel while removing the last bolt and keep the spacers with the driveplate for automatic transaxle equipped vehicles. To install the flywheel/driveplate, clean it and inspect for any damage. Clean and inspect the mating surfaces of the flywheel/driveplate and crankshaft. Position the flywheel/driveplate against the crankshaft, aligning the marks made during removal. Apply thread locking compound to the bolt threads before tightening them in a criss-cross pattern. The remaining installation steps are the reverse of the removal procedure.