How to remove and install an intake manifold on Four cylinder engine in a 2001 Toyota Solara?

Disconnect the negative cable from the battery. Loosen the air cleaner hose clamp at the throttle body and remove the air cleaner top (four clamps), resonator, and hose. Disconnect the coolant hoses from the throttle body and plug them to prevent coolant leakage. Label and detach any wire harness and control cables or hoses connected to the intake manifold. Press in on the clips to release the wiring harness retainers. Disconnect the two ground straps from the firewall side of the intake manifold, then disconnect the knock sensor. Carefully lift the wire harness over the manifold. Unbolt the intake manifold-to-engine braces. Disconnect the electrical connectors from the coil pack, then remove the mounting bolts and remove the coil pack mount/intake brace. Remove the mounting nuts/bolts, then detach the manifold from the engine. Use a scraper to remove all traces of old gasket material and sealant from the manifold and cylinder head, then clean the mating surfaces with lacquer thinner or acetone. If the gasket was leaking, have the manifold checked for warpage at an automotive machine shop and resurfaced if necessary. Install a new gasket, then position the manifold on the head and install the nuts/bolts. Tighten the nuts/bolts. Work from the center out towards the ends to avoid warping the manifold. Install the remaining parts in the reverse order of removal. Before starting the engine, check the throttle linkage for smooth operation. Check the coolant and add some if necessary to bring it to the appropriate level. Run the engine and check for coolant and vacuum leaks. Road test the vehicle and check for proper operation of all accessories, including the cruise control system.

Genuine 2001 Toyota Solara Intake Manifold

Engine Intake Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Intake Manifolds found

View related parts
2001 Toyota Solara Manifold, Intake
Part Number: 17120-0H010
$443.40 MSRP: $652.69
You Save: $209.29 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Intake Manifold
- Replaces: 17120-28070
- Part Name Code: 17111
- Item Weight: 14.30 Pounds
- Item Dimensions: 21.0 x 10.1 x 12.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17120-0H010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Solara Submodels:
- SE, SLE | 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.3L | 1MZFE, 2AZFE, 3MZFE, 5SFE; ACV20L-GCMNKA, ACV20L-GCPNKA, ACV20L-GCPNKK, ACV20L-GKPNKA, ACV30L-GCAGKA, ACV30L-GCANKA, ACV30L-GCMNKA, ACV30L-GCPGKA, ACV30L-GCPNKA, MCV20L-GCMNKA, MCV20L-GCMNKK, MCV20L-GCPNKA, MCV20L-GCPNKK, MCV20L-GKPNKA, MCV20L-GKPNKK, MCV31L-GCAGKA, MCV31L-GCANKA, MCV31L-GKAGKA, MCV31L-GKANKA, SXV20L-GCMNKA, SXV20L-GCPNKA, SXV20L-GCPNKK, SXV20L-GKPNKA
View related parts
2001 Toyota Solara Manifold, Intake
Part Number: 17101-0A010
$301.95 MSRP: $432.97
You Save: $131.02 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: (L)
- Replaced by: 17101-20010
- Part Name Code: 17111
- Item Weight: 9.40 Pounds
- Item Dimensions: 18.9 x 14.1 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17101-0A010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Solara Submodels:
- 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.0L | 1MZFE, 2AZFE, 5SFE; ACV20L-GCMNKA, ACV20L-GCPNKA, ACV20L-GCPNKK, ACV20L-GKPNKA, MCV20L-GCMNKA, MCV20L-GCMNKK, MCV20L-GCPNKA, MCV20L-GCPNKK, MCV20L-GKPNKA, MCV20L-GKPNKK, SXV20L-GCMNKA, SXV20L-GCPNKA, SXV20L-GCPNKK, SXV20L-GKPNKA
View related parts
2001 Toyota Solara Manifold, Intake
Part Number: 17101-03051
$257.08 MSRP: $368.64
You Save: $111.56 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: TYPE A:REFER TO ILLUSTRATION
- Replaced by: 17101-74311
- Part Name Code: 17111
- Item Weight: 9.70 Pounds
- Item Dimensions: 17.6 x 13.8 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17101-03051
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Solara Submodels:
- 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.0L | 1MZFE, 2AZFE, 5SFE; ACV20L-GCMNKA, ACV20L-GCPNKA, ACV20L-GCPNKK, ACV20L-GKPNKA, MCV20L-GCMNKA, MCV20L-GCMNKK, MCV20L-GCPNKA, MCV20L-GCPNKK, MCV20L-GKPNKA, MCV20L-GKPNKK, SXV20L-GCMNKA, SXV20L-GCPNKA, SXV20L-GCPNKK, SXV20L-GKPNKA
View related parts
2001 Toyota Solara Manifold, Intake
Part Number: 17101-74311
Product Specifications
- Other Name: Intake Manifold
- Manufacturer Note: TYPE B:REFER TO ILLUSTRATION
- Replaces: 17101-74310, 17101-03050, 17101-03051
- Part Name Code: 17111
- Item Weight: 9.50 Pounds
- Item Dimensions: 18.7 x 14.2 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17101-74311
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Solara Submodels:
- 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.0L | 1MZFE, 2AZFE, 5SFE; ACV20L-GCMNKA, ACV20L-GCPNKA, ACV20L-GCPNKK, ACV20L-GKPNKA, MCV20L-GCMNKA, MCV20L-GCMNKK, MCV20L-GCPNKA, MCV20L-GCPNKK, MCV20L-GKPNKA, MCV20L-GKPNKK, SXV20L-GCMNKA, SXV20L-GCPNKA, SXV20L-GCPNKK, SXV20L-GKPNKA
View related parts
2001 Toyota Solara Manifold, Intake
Part Number: 17101-20010
Product Specifications
- Other Name: Intake Manifold
- Manufacturer Note: (J)
- Replaces: 17101-0A010
- Part Name Code: 17111
- Item Weight: 9.60 Pounds
- Item Dimensions: 18.3 x 13.9 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17101-20010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2001 Toyota Solara Submodels:
- 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.0L | 1MZFE, 2AZFE, 5SFE; ACV20L-GCMNKA, ACV20L-GCPNKA, ACV20L-GCPNKK, ACV20L-GKPNKA, MCV20L-GCMNKA, MCV20L-GCMNKK, MCV20L-GCPNKA, MCV20L-GCPNKK, MCV20L-GKPNKA, MCV20L-GKPNKK, SXV20L-GCMNKA, SXV20L-GCPNKA, SXV20L-GCPNKK, SXV20L-GKPNKA

2001 Toyota Solara Intake Manifold

With ToyotaPartsDeal.com, you have access to an extensive inventory of genuine 2001 Toyota Solara Intake Manifold, all priced competitively. Feel secure in your purchase, as all our OEM 2001 Toyota Solara Intake Manifold are covered by the manufacturer's warranty. Plus, we offer a hassle-free return policy and speedy delivery service.

2001 Toyota Solara Intake Manifold Parts Questions & Experts Answers

Q: How to remove and install an intake manifold on Four cylinder engine in a 2001 Toyota Solara?
A: Disconnect the negative cable from the battery. Loosen the air cleaner hose clamp at the throttle body and remove the air cleaner top (four clamps), resonator, and hose. Disconnect the coolant hoses from the throttle body and plug them to prevent coolant leakage. Label and detach any wire harness and control cables or hoses connected to the intake manifold. Press in on the clips to release the wiring harness retainers. Disconnect the two ground straps from the firewall side of the intake manifold, then disconnect the knock sensor. Carefully lift the wire harness over the manifold. Unbolt the intake manifold-to-engine braces. Disconnect the electrical connectors from the coil pack, then remove the mounting bolts and remove the coil pack mount/intake brace. Remove the mounting nuts/bolts, then detach the manifold from the engine. Use a scraper to remove all traces of old gasket material and sealant from the manifold and cylinder head, then clean the mating surfaces with lacquer thinner or acetone. If the gasket was leaking, have the manifold checked for warpage at an automotive machine shop and resurfaced if necessary. Install a new gasket, then position the manifold on the head and install the nuts/bolts. Tighten the nuts/bolts. Work from the center out towards the ends to avoid warping the manifold. Install the remaining parts in the reverse order of removal. Before starting the engine, check the throttle linkage for smooth operation. Check the coolant and add some if necessary to bring it to the appropriate level. Run the engine and check for coolant and vacuum leaks. Road test the vehicle and check for proper operation of all accessories, including the cruise control system.