How to remove and install front and rear window regulator/motor assemblies for the 2001 Toyota Solara?

Follow these steps: first, take off the door trim panel and the plastic water shield, next remove the window glass assembly. To get power windows working again, first pull the connecting wire from the motor, then remove the bolts holding the window regulator and motor together. Before you take out the lower roller guide we need you to measure and record the rear bolt position of the upper roller guide. To finish, drag the equalizer arms and window regulators from their slots in the door frame's service opening. As you put these parts back together, first smear white grease on the rollers and wear spots of the window regulator. First, take off both the door trim panel and the plastic water shield at the back of the door. Next step is to pull out the window glass assembly. Unplug the motor power wire for power windows, then undo the bolts that hold the motor and window regulator in place on the front door panel. Lift the window regulator assembly out of the door frame by removing the equalizer bar and lifting it through the entry hole. For putting back the parts, we repeat the same steps backwards, making sure to apply white grease onto the rollers and window regulator wear spots before completing the job.

Genuine 2001 Toyota Solara Window Regulator

Electric Power Window Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Window Regulators found

View related parts
2001 Toyota Solara Window Regulator
Part Number: 69820-06031
$366.82 MSRP: $547.23
You Save: $180.41 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator Assembly, Front Door Window, Driver Side; Window Regulator
- Position: Driver Side
- Replaces: 69820-06030
- Part Name Code: 69820
- Item Weight: 7.40 Pounds
- Item Dimensions: 25.4 x 22.1 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69820-06031
- Warranty: This genuine Toyota part is covered by warranty.
More Info
Fits the following 2001 Toyota Solara Submodels:
- 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.0L | 1MZFE, 2AZFE, 5SFE; ACV20L-GCMNKA, ACV20L-GCPNKA, ACV20L-GCPNKK, ACV20L-GKPNKA, MCV20L-GCMNKA, MCV20L-GCMNKK, MCV20L-GCPNKA, MCV20L-GCPNKK, MCV20L-GKPNKA, MCV20L-GKPNKK, SXV20L-GCMNKA, SXV20L-GCPNKA, SXV20L-GCPNKK, SXV20L-GKPNKA
View related parts
2001 Toyota Solara Window Regulator
Part Number: 69802-06020
$122.60 MSRP: $174.30
You Save: $51.70 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator Subassembly, Front Door Window, Driver Side; Window Regulator
- Position: Driver Side
- Part Name Code: 69802
- Item Weight: 4.60 Pounds
- Item Dimensions: 25.2 x 22.3 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69802-06020
- Warranty: This genuine Toyota part is covered by warranty.
More Info
Fits the following 2001 Toyota Solara Submodels:
- 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.0L | 1MZFE, 2AZFE, 5SFE; ACV20L-GCMNKA, ACV20L-GCPNKA, ACV20L-GCPNKK, ACV20L-GKPNKA, MCV20L-GCMNKA, MCV20L-GCMNKK, MCV20L-GCPNKA, MCV20L-GCPNKK, MCV20L-GKPNKA, MCV20L-GKPNKK, SXV20L-GCMNKA, SXV20L-GCPNKA, SXV20L-GCPNKK, SXV20L-GKPNKA
View related parts
2001 Toyota Solara Front Door Window Regulator Sub-Assembly Right Hand
Part Number: 69801-06020
Product Specifications
- Other Name: Regulator Sub-Assy, Front Door Window, RH; Window Regulator
- Position: Passenger Side
- Part Name Code: 69801
- Item Weight: 4.40 Pounds
- Item Dimensions: 18.7 x 13.8 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69801-06020
- Warranty: This genuine Toyota part is covered by warranty.
More Info
Fits the following 2001 Toyota Solara Submodels:
- 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.0L | 1MZFE, 2AZFE, 5SFE; ACV20L-GCMNKA, ACV20L-GCPNKA, ACV20L-GCPNKK, ACV20L-GKPNKA, MCV20L-GCMNKA, MCV20L-GCMNKK, MCV20L-GCPNKA, MCV20L-GCPNKK, MCV20L-GKPNKA, MCV20L-GKPNKK, SXV20L-GCMNKA, SXV20L-GCPNKA, SXV20L-GCPNKK, SXV20L-GKPNKA
View related parts
2001 Toyota Solara Front Door Window Regulator Assembly, Right Side
Part Number: 69810-06031
Product Specifications
- Other Name: Regulator Assy, Front Door Window, RH; Window Regulator
- Position: Passenger Side
- Replaces: 69810-06030
- Part Name Code: 69810A
- Item Weight: 5.50 Pounds
- Item Dimensions: 7.6 x 5.6 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 69810-06031
- Warranty: This genuine Toyota part is covered by warranty.
More Info
Fits the following 2001 Toyota Solara Submodels:
- 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.0L | 1MZFE, 2AZFE, 5SFE; ACV20L-GCMNKA, ACV20L-GCPNKA, ACV20L-GCPNKK, ACV20L-GKPNKA, MCV20L-GCMNKA, MCV20L-GCMNKK, MCV20L-GCPNKA, MCV20L-GCPNKK, MCV20L-GKPNKA, MCV20L-GKPNKK, SXV20L-GCMNKA, SXV20L-GCPNKA, SXV20L-GCPNKK, SXV20L-GKPNKA

2001 Toyota Solara Window Regulator

With ToyotaPartsDeal.com, you have access to an extensive inventory of genuine 2001 Toyota Solara Window Regulator, all priced competitively. Feel secure in your purchase, as all our OEM 2001 Toyota Solara Window Regulator are covered by warranty. Plus, we offer a hassle-free return policy and speedy delivery service.

2001 Toyota Solara Window Regulator Parts Questions & Experts Answers

Q:
How to remove and install front and rear window regulator/motor assemblies for the 2001 Toyota Solara?
Posted by Pasqual D.
A:
Follow these steps: first, take off the door trim panel and the plastic water shield, next remove the window glass assembly. To get power windows working again, first pull the connecting wire from the motor, then remove the bolts holding the window regulator and motor together. Before you take out the lower roller guide we need you to measure and record the rear bolt position of the upper roller guide. To finish, drag the equalizer arms and window regulators from their slots in the door frame's service opening. As you put these parts back together, first smear white grease on the rollers and wear spots of the window regulator. First, take off both the door trim panel and the plastic water shield at the back of the door. Next step is to pull out the window glass assembly. Unplug the motor power wire for power windows, then undo the bolts that hold the motor and window regulator in place on the front door panel. Lift the window regulator assembly out of the door frame by removing the equalizer bar and lifting it through the entry hole. For putting back the parts, we repeat the same steps backwards, making sure to apply white grease onto the rollers and window regulator wear spots before completing the job.
Answered by Toyota Parts Specialist Bruce / Mar 30, 2022