How to remove and install the front shock absorber for the 2004 Toyota Sienna?

To remove the shock absorber, first, loosen the wheel lug nuts, raise the vehicle and support it securely on jack stands, and remove the wheel and cowl cover. Then, disconnect the stabilizer link and brake hose bracket from the shock absorber, and detach the ABS speed sensor wiring harness. Remove the shock absorber-to-knuckle nuts and separate the shock absorber from the steering knuckle. Support the shock absorber and spring assembly and remove the three shock absorber mount-to-shock-tower nuts. To inspect the shock absorber, check for leaking fluid, dents, cracks, and other damage, as well as chips or cracks in the Coil Springs and cuts or deterioration in the spring seat. To install the shock absorber, guide the assembly up into the fender, insert the three upper mounting studs through the holes in the shock tower, and install the nuts. Slide the steering knuckle into the shock absorber Hange and insert the two bolts, then reattach the brake hose bracket, speed sensor wiring harness bracket, and stabilizer link. Install the wheel and lug nuts, lower the vehicle, and tighten the lug nuts and three upper mounting nuts to the proper torque specifications. Finally, check the front wheel alignment and adjust it if necessary.

Genuine 2004 Toyota Sienna Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Shock Absorbers found

View related parts
2004 Toyota Sienna Shock Absorber Assembly Rear Right
Part Number: 48531-A9050
$66.07 MSRP: $93.13
You Save: $27.06 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock, Rear Rh; Shock, Shock Absorber
- Manufacturer Note: MARK 48531-AE020
- Position: Rear Passenger Side
- Item Weight: 7.00 Pounds
- Item Dimensions: 25.6 x 6.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48531-A9050
- Warranty: This genuine Toyota part is covered by warranty.
More Info
Fits the following 2004 Toyota Sienna Submodels:
- CE, LE, XLE | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; GSL20L-PFADKK, GSL20L-PFAEKA, GSL20L-PFAEKK, GSL20L-PFAQKA, GSL20L-PFAQKK, GSL20L-PRADKK, GSL20L-PRAEKA, GSL20L-PRAEKK, GSL20L-PRAQKA, GSL20L-PRAQKK, GSL23L-SBADKA, GSL23L-SBADKK, GSL25L-PFADKK, GSL25L-PFAEKA, GSL25L-PFAEKK, GSL25L-PFAQKA, GSL25L-PFAQKK, MCL20L-PFADKK, MCL20L-PFAEKA, MCL20L-PFAEKK, MCL20L-PFAQKA, MCL20L-PFAQKK, MCL20L-PRADKK, MCL20L-PRAEKA, MCL20L-PRAEKK, MCL20L-PRAQKA, MCL20L-PRAQKK, MCL23L-SBADKA, MCL23L-SBADKK, MCL25L-PFADKK, MCL25L-PFAEKA, MCL25L-PFAEKK, MCL25L-PFAQKA, MCL25L-PFAQKK
View related parts
2004 Toyota Sienna Shock Absorber Assembly Front Left
Part Number: 48520-A9160
$159.11 MSRP: $226.20
You Save: $67.09 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assy, Shock, Front Lh; Strut
- Manufacturer Note: MARK 48520-AE020
- Position: Front Driver Side
- Part Name Code: 48520
- Item Weight: 9.60 Pounds
- Item Dimensions: 27.1 x 8.4 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48520-A9160
- Warranty: This genuine Toyota part is covered by warranty.
More Info
Fits the following 2004 Toyota Sienna Submodels:
- CE, LE, XLE | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; GSL20L-PFADKK, GSL20L-PFAEKA, GSL20L-PFAEKK, GSL20L-PFAQKA, GSL20L-PFAQKK, GSL20L-PRADKK, GSL20L-PRAEKA, GSL20L-PRAEKK, GSL20L-PRAQKA, GSL20L-PRAQKK, GSL23L-SBADKA, GSL23L-SBADKK, GSL25L-PFADKK, GSL25L-PFAEKA, GSL25L-PFAEKK, GSL25L-PFAQKA, GSL25L-PFAQKK, MCL20L-PFADKK, MCL20L-PFAEKA, MCL20L-PFAEKK, MCL20L-PFAQKA, MCL20L-PFAQKK, MCL20L-PRADKK, MCL20L-PRAEKA, MCL20L-PRAEKK, MCL20L-PRAQKA, MCL20L-PRAQKK, MCL23L-SBADKA, MCL23L-SBADKK, MCL25L-PFADKK, MCL25L-PFAEKA, MCL25L-PFAEKK, MCL25L-PFAQKA, MCL25L-PFAQKK
View related parts
2004 Toyota Sienna Shock Absorber Assembly Front Right
Part Number: 48510-A9240
$143.90 MSRP: $204.57
You Save: $60.67 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assy, Shock, Front Rh; Strut
- Manufacturer Note: MARK 48510-AE020
- Position: Front Passenger Side
- Part Name Code: 48510
- Item Weight: 9.30 Pounds
- Item Dimensions: 27.1 x 8.6 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-A9240
- Warranty: This genuine Toyota part is covered by warranty.
More Info
Fits the following 2004 Toyota Sienna Submodels:
- CE, LE, XLE | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; GSL20L-PFADKK, GSL20L-PFAEKA, GSL20L-PFAEKK, GSL20L-PFAQKA, GSL20L-PFAQKK, GSL20L-PRADKK, GSL20L-PRAEKA, GSL20L-PRAEKK, GSL20L-PRAQKA, GSL20L-PRAQKK, GSL23L-SBADKA, GSL23L-SBADKK, GSL25L-PFADKK, GSL25L-PFAEKA, GSL25L-PFAEKK, GSL25L-PFAQKA, GSL25L-PFAQKK, MCL20L-PFADKK, MCL20L-PFAEKA, MCL20L-PFAEKK, MCL20L-PFAQKA, MCL20L-PFAQKK, MCL20L-PRADKK, MCL20L-PRAEKA, MCL20L-PRAEKK, MCL20L-PRAQKA, MCL20L-PRAQKK, MCL23L-SBADKA, MCL23L-SBADKK, MCL25L-PFADKK, MCL25L-PFAEKA, MCL25L-PFAEKK, MCL25L-PFAQKA, MCL25L-PFAQKK
View related parts
2004 Toyota Sienna Shock Absorber Assembly Rear Left
Part Number: 48531-A9060
$66.07 MSRP: $93.13
You Save: $27.06 (30%)
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock, Rear Lh
- Position: Rear Driver Side
- Replaced by: 48531-A9200
- Item Weight: 5.50 Pounds
- Item Dimensions: 26.4 x 6.8 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48531-A9060
- Warranty: This genuine Toyota part is covered by warranty.
More Info
Fits the following 2004 Toyota Sienna Submodels:
- CE, LE, XLE | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; GSL20L-PFADKK, GSL20L-PFAEKA, GSL20L-PFAEKK, GSL20L-PFAQKA, GSL20L-PFAQKK, GSL20L-PRADKK, GSL20L-PRAEKA, GSL20L-PRAEKK, GSL20L-PRAQKA, GSL20L-PRAQKK, GSL23L-SBADKA, GSL23L-SBADKK, GSL25L-PFADKK, GSL25L-PFAEKA, GSL25L-PFAEKK, GSL25L-PFAQKA, GSL25L-PFAQKK, MCL20L-PFADKK, MCL20L-PFAEKA, MCL20L-PFAEKK, MCL20L-PFAQKA, MCL20L-PFAQKK, MCL20L-PRADKK, MCL20L-PRAEKA, MCL20L-PRAEKK, MCL20L-PRAQKA, MCL20L-PRAQKK, MCL23L-SBADKA, MCL23L-SBADKK, MCL25L-PFADKK, MCL25L-PFAEKA, MCL25L-PFAEKK, MCL25L-PFAQKA, MCL25L-PFAQKK
View related parts
2004 Toyota Sienna Shock Absorber Assembly Front Left
Part Number: 48520-A9170
$162.62 MSRP: $231.19
You Save: $68.57 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assy, Shock, Front Lh
- Position: Front Driver Side
- Replaced by: 48520-A9360
- Part Name Code: 48520
- Item Weight: 9.50 Pounds
- Item Dimensions: 26.4 x 8.4 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48520-A9170
- Warranty: This genuine Toyota part is covered by warranty.
More Info
Fits the following 2004 Toyota Sienna Submodels:
- CE, LE, XLE | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; GSL20L-PFADKK, GSL20L-PFAEKA, GSL20L-PFAEKK, GSL20L-PFAQKA, GSL20L-PFAQKK, GSL20L-PRADKK, GSL20L-PRAEKA, GSL20L-PRAEKK, GSL20L-PRAQKA, GSL20L-PRAQKK, GSL23L-SBADKA, GSL23L-SBADKK, GSL25L-PFADKK, GSL25L-PFAEKA, GSL25L-PFAEKK, GSL25L-PFAQKA, GSL25L-PFAQKK, MCL20L-PFADKK, MCL20L-PFAEKA, MCL20L-PFAEKK, MCL20L-PFAQKA, MCL20L-PFAQKK, MCL20L-PRADKK, MCL20L-PRAEKA, MCL20L-PRAEKK, MCL20L-PRAQKA, MCL20L-PRAQKK, MCL23L-SBADKA, MCL23L-SBADKK, MCL25L-PFADKK, MCL25L-PFAEKA, MCL25L-PFAEKK, MCL25L-PFAQKA, MCL25L-PFAQKK
View related parts
2004 Toyota Sienna Shock Absorber Assembly Front Right
Part Number: 48510-A9250
$160.28 MSRP: $227.86
You Save: $67.58 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assy, Shock, Front Rh
- Position: Front Passenger Side
- Replaced by: 48510-A9680
- Part Name Code: 48510
- Item Weight: 13.80 Pounds
- Item Dimensions: 27.4 x 8.3 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48510-A9250
- Warranty: This genuine Toyota part is covered by warranty.
More Info
Fits the following 2004 Toyota Sienna Submodels:
- CE, LE, XLE | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; GSL20L-PFADKK, GSL20L-PFAEKA, GSL20L-PFAEKK, GSL20L-PFAQKA, GSL20L-PFAQKK, GSL20L-PRADKK, GSL20L-PRAEKA, GSL20L-PRAEKK, GSL20L-PRAQKA, GSL20L-PRAQKK, GSL23L-SBADKA, GSL23L-SBADKK, GSL25L-PFADKK, GSL25L-PFAEKA, GSL25L-PFAEKK, GSL25L-PFAQKA, GSL25L-PFAQKK, MCL20L-PFADKK, MCL20L-PFAEKA, MCL20L-PFAEKK, MCL20L-PFAQKA, MCL20L-PFAQKK, MCL20L-PRADKK, MCL20L-PRAEKA, MCL20L-PRAEKK, MCL20L-PRAQKA, MCL20L-PRAQKK, MCL23L-SBADKA, MCL23L-SBADKK, MCL25L-PFADKK, MCL25L-PFAEKA, MCL25L-PFAEKK, MCL25L-PFAQKA, MCL25L-PFAQKK

2004 Toyota Sienna Shock Absorber

With ToyotaPartsDeal.com, you have access to an extensive inventory of genuine 2004 Toyota Sienna Shock Absorber, all priced competitively. Feel secure in your purchase, as all our OEM 2004 Toyota Sienna Shock Absorber are covered by warranty. Plus, we offer a hassle-free return policy and speedy delivery service.

2004 Toyota Sienna Shock Absorber Parts Questions & Experts Answers

Q:
How to remove and install the front shock absorber for the 2004 Toyota Sienna?
Posted by Dzianis N.
A:
To remove the shock absorber, first, loosen the wheel lug nuts, raise the vehicle and support it securely on jack stands, and remove the wheel and cowl cover. Then, disconnect the stabilizer link and brake hose bracket from the shock absorber, and detach the ABS speed sensor wiring harness. Remove the shock absorber-to-knuckle nuts and separate the shock absorber from the steering knuckle. Support the shock absorber and spring assembly and remove the three shock absorber mount-to-shock-tower nuts. To inspect the shock absorber, check for leaking fluid, dents, cracks, and other damage, as well as chips or cracks in the Coil Springs and cuts or deterioration in the spring seat. To install the shock absorber, guide the assembly up into the fender, insert the three upper mounting studs through the holes in the shock tower, and install the nuts. Slide the steering knuckle into the shock absorber Hange and insert the two bolts, then reattach the brake hose bracket, speed sensor wiring harness bracket, and stabilizer link. Install the wheel and lug nuts, lower the vehicle, and tighten the lug nuts and three upper mounting nuts to the proper torque specifications. Finally, check the front wheel alignment and adjust it if necessary.
Answered by Toyota Parts Specialist Jerry / Feb 15, 2025