My Garage
My Account
Cart
Genuine 2008 Toyota Solara Shift Cable
Transmission Shift Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Shift Cables found
2008 Toyota Solara Cable Assy, Transmission Control
Part Number: 33820-AA010$222.71 MSRP: $319.34You Save: $96.63 (31%)Product Specifications- Part Name Code: 33820B
- Item Weight: 2.40 Pounds
- Item Dimensions: 12.6 x 11.1 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 33820-AA010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Product Specifications- Part Name Code: 33820B
- Item Weight: 2.30 Pounds
- Item Dimensions: 43.1 x 7.0 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 33820-AA020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Product Specifications- Other Name: Shift Control Cable
- Part Name Code: 33820B
- Item Weight: 2.30 Pounds
- Item Dimensions: 43.1 x 7.1 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 33820-06280
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
2008 Toyota Solara Shift Cable
With ToyotaPartsDeal.com, you have access to an extensive inventory of genuine 2008 Toyota Solara Shift Cable, all priced competitively. Feel secure in your purchase, as all our OEM 2008 Toyota Solara Shift Cable are covered by the manufacturer's warranty. Plus, we offer a hassle-free return policy and speedy delivery service.
2008 Toyota Solara Shift Cable Parts Questions & Experts Answers
- Q: How to adjust the shift cable for the 2008 Toyota Solara?A: Every time the shift lever inside the vehicle is shifted from the Neutral position to any other position, it should shift in and out into the selected position satisfyingly and correctly with corresponding gear position on the shift indicator. If the chosen indicator is incorrect, lift the car and safely place it on jackstands and then unbolt the splash shields that protects the front part of the car to the lower crossmember. Subsequently, classify the swivel nut that is located at the manual shift lever in the transaxle and then unscrew it slightly. Shift the manual lever down to Park and then back up to the Neutral position and adjust the shift lever inside the car to the Neutral before tightening the swivel nut. With rotating the knob slightly in the direction of the REVERSE, properly fasten the swivel nut and check the function of the transaxle with shift lever positions for the starter's function whereby it should only be operative in the Park and Neutral positions. For replacement, free off the cable from the manual lever and dismantle the large C-clip cable retainer situated on the bracket that is above the manual lever. Take out the center console and unscrew the cable housing retainer on the inside of the floor of the car, next carefully twis the flange of the cable end to release the clips and then pry the cable eye off the shifter pin. Remove the cable eye from shift lever pin and take the cable through the floored hole. Upon completion, one needs to adjust the cable and installation is carried out in the opposite sequence to that of removal.
Related 2008 Toyota Solara Parts
2008 Toyota Solara Release Bearing
2008 Toyota Solara Clutch Master Cylinder
2008 Toyota Solara Clutch Fork
2008 Toyota Solara Bellhousing
2008 Toyota Solara Pressure Plate
2008 Toyota Solara Valve Body
2008 Toyota Solara Clutch Disc
2008 Toyota Solara Clutch Slave Cylinder
2008 Toyota Solara Neutral Safety Switch
2008 Toyota Solara Flywheel