How to remove and install the front crankshaft seal for the 2018 Toyota RAV4?

Remove the crankshaft pulley and note how the seal is installed, ensuring the new one is positioned to the same depth and orientation. Carefully pry the oil seal out of the cover using a seal puller or a large screwdriver, taking care not to damage the crankshaft or distort the cover. To prevent damage, wrap electrician's tape around the screwdriver tip. Apply clean engine oil or multi-purpose grease to the outer edge of the new seal and install it in the cover with the lip facing inward. Drive the seal into place using a seal driver or a large socket and hammer, ensuring it enters the bore squarely and stops at the correct depth. Check the pulley hub surface for grooves caused by long-term contact with the seal; if damaged, replace the pulley. Lubricate the pulley hub with clean engine oil and reinstall the crankshaft pulley. Finally, install and tighten the crankshaft pulley retaining bolt, completing the installation in reverse order of removal.

Genuine 2018 Toyota RAV4 Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Crankshaft Seals found

View related parts
2018 Toyota RAV4 Type T Oil Seal
Part Number: 90311-A0015
$8.20 MSRP: $11.46
You Save: $3.26 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Oil(For Timing Gear Case Or Timing Chain Case)
- Comment: (FOR TIMING GEAR CASE OR TIMING CHAIN CASE)
- Replaces: 90311-A0019, 90311-42043
- Part Name Code: 11301C
- Item Weight: 1.40 Pounds
- Item Dimensions: 2.3 x 2.4 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90311-A0015
- Warranty: This genuine Toyota part is covered by warranty.
More Info
Fits the following 2018 Toyota RAV4 Submodels:
- LE, Limited, SE, Sport, STD, XLE | 4 Cyl 2.5L, 6 Cyl 3.5L | 2ARFE, 2GRFE; ASA33L-CNPGKA, ASA33L-CNPGKK, ASA33L-CNPSKA, ASA33L-CNPSKK, ASA33L-CNPXKA, ASA33L-CNPXKK, ASA38L-CNPGKA, ASA38L-CNPGKK, ASA38L-CNPSKA, ASA38L-CNPSKK, ASA38L-CNPXKA, ASA38L-CNPXKK, ASA42L-CNTGKA, ASA42L-CNTGKK, ASA42L-CNTMKA, ASA42L-CNTMKK, ASA42L-CNTSKA, ASA42L-CNTSKK, ASA42L-CNTXKA, ASA42L-CNTXKK, ASA44L-CNTGKA, ASA44L-CNTGKK, ASA44L-CNTMKA, ASA44L-CNTMKK, ASA44L-CNTSKA, ASA44L-CNTSKK, ASA44L-CNTXKA, ASA44L-CNTXKK, GSA33L-CNAGKA, GSA33L-CNAGKK, GSA33L-CNASKA, GSA33L-CNASKK, GSA33L-CNAXKA, GSA33L-CNAXKK, GSA38L-CNAGKA, GSA38L-CNAGKK, GSA38L-CNASKA, GSA38L-CNASKK, GSA38L-CNAXKA, GSA38L-CNAXKK
View related parts
2018 Toyota RAV4 Type T Oil Seal
Part Number: 90311-A0020
$29.38 MSRP: $41.07
You Save: $11.69 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Rear Oil; Rear Main Seal, Rear Seal
- Replaces: 90311-A0016, 90311-89006
- Part Name Code: 11401L
- Item Weight: 1.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90311-A0020
- Warranty: This genuine Toyota part is covered by warranty.
More Info
Fits the following 2018 Toyota RAV4 Submodels:
- LE, Limited, SE, Sport, STD, XLE | 4 Cyl 2.5L, 6 Cyl 3.5L | 2ARFE, 2GRFE; ASA33L-CNPGKA, ASA33L-CNPGKK, ASA33L-CNPSKA, ASA33L-CNPSKK, ASA33L-CNPXKA, ASA33L-CNPXKK, ASA38L-CNPGKA, ASA38L-CNPGKK, ASA38L-CNPSKA, ASA38L-CNPSKK, ASA38L-CNPXKA, ASA38L-CNPXKK, ASA42L-CNTGKA, ASA42L-CNTGKK, ASA42L-CNTMKA, ASA42L-CNTMKK, ASA42L-CNTSKA, ASA42L-CNTSKK, ASA42L-CNTXKA, ASA42L-CNTXKK, ASA44L-CNTGKA, ASA44L-CNTGKK, ASA44L-CNTMKA, ASA44L-CNTMKK, ASA44L-CNTSKA, ASA44L-CNTSKK, ASA44L-CNTXKA, ASA44L-CNTXKK, GSA33L-CNAGKA, GSA33L-CNAGKK, GSA33L-CNASKA, GSA33L-CNASKK, GSA33L-CNAXKA, GSA33L-CNAXKK, GSA38L-CNAGKA, GSA38L-CNAGKK, GSA38L-CNASKA, GSA38L-CNASKK, GSA38L-CNAXKA, GSA38L-CNAXKK
View related parts
2018 Toyota RAV4 Type T Oil Seal
Part Number: 90311-89015
$29.50 MSRP: $41.23
You Save: $11.73 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Rear Oil; Rear Main Seal
- Replaces: 90311-89005, 90311-89013, 90311-C0023
- Part Name Code: 11401L
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.2 x 4.9 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90311-89015
- Warranty: This genuine Toyota part is covered by warranty.
More Info
Fits the following 2018 Toyota RAV4 Submodels:
- LE, Limited, SE, XLE | 4 Cyl 2.5L | 2ARFE, 2ARFXE; ASA42L-ANTGKA, ASA42L-ANTMKA, ASA42L-ANTSKA, ASA42L-ANTXKA, ASA42L-CNTGKA, ASA42L-CNTGKK, ASA42L-CNTMKA, ASA42L-CNTMKK, ASA42L-CNTSKA, ASA42L-CNTSKK, ASA42L-CNTXKA, ASA42L-CNTXKK, ASA44L-ANTGKA, ASA44L-ANTMKA, ASA44L-ANTSKA, ASA44L-ANTXKA, ASA44L-CNTGKA, ASA44L-CNTGKK, ASA44L-CNTMKA, ASA44L-CNTMKK, ASA44L-CNTSKA, ASA44L-CNTSKK, ASA44L-CNTXKA, ASA44L-CNTXKK, AVA44L-ANXGBA, AVA44L-ANXGBK, AVA44L-ANXMBA, AVA44L-ANXMBK, AVA44L-ANXSBA, AVA44L-ANXSBK
View related parts
2018 Toyota RAV4 Type T Oil Seal
Part Number: 90311-40042
$12.13 MSRP: $16.95
You Save: $4.82 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Oil(For Timing Gear Case Or Timing Chain Case)
- Replaced by: 90311-42061
- Part Name Code: 11301C
- Item Weight: 0.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90311-40042
- Warranty: This genuine Toyota part is covered by warranty.
More Info
Fits the following 2018 Toyota RAV4 Submodels:
- LE, Limited, SE, XLE | 4 Cyl 2.5L | 2ARFE, 2ARFXE; ASA42L-ANTGKA, ASA42L-ANTMKA, ASA42L-ANTSKA, ASA42L-ANTXKA, ASA42L-CNTGKA, ASA42L-CNTGKK, ASA42L-CNTMKA, ASA42L-CNTMKK, ASA42L-CNTSKA, ASA42L-CNTSKK, ASA42L-CNTXKA, ASA42L-CNTXKK, ASA44L-ANTGKA, ASA44L-ANTMKA, ASA44L-ANTSKA, ASA44L-ANTXKA, ASA44L-CNTGKA, ASA44L-CNTGKK, ASA44L-CNTMKA, ASA44L-CNTMKK, ASA44L-CNTSKA, ASA44L-CNTSKK, ASA44L-CNTXKA, ASA44L-CNTXKK, AVA44L-ANXGBA, AVA44L-ANXGBK, AVA44L-ANXMBA, AVA44L-ANXMBK, AVA44L-ANXSBA, AVA44L-ANXSBK
View related parts
2018 Toyota RAV4 Type T Oil Seal
Part Number: 90311-C0036
$14.63 MSRP: $20.44
You Save: $5.81 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Oil(For Timing Gear Case Or Timing Chain Case)
- Manufacturer Note: *347
- Part Name Code: 11301C
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90311-C0036
- Warranty: This genuine Toyota part is covered by warranty.
More Info
Fits the following 2018 Toyota RAV4 Submodels:
- LE, Limited, SE, XLE | 4 Cyl 2.5L | 2ARFE, 2ARFXE; ASA42L-ANTGKA, ASA42L-ANTMKA, ASA42L-ANTSKA, ASA42L-ANTXKA, ASA44L-ANTGKA, ASA44L-ANTMKA, ASA44L-ANTSKA, ASA44L-ANTXKA, AVA44L-ANXGBA, AVA44L-ANXGBK, AVA44L-ANXMBA, AVA44L-ANXMBK, AVA44L-ANXSBA, AVA44L-ANXSBK
View related parts
2018 Toyota RAV4 Type T Oil Seal
Part Number: 90311-C0023
$29.50 MSRP: $41.23
You Save: $11.73 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Rear Oil
- Manufacturer Note: *347
- Replaced by: 90311-89015
- Part Name Code: 11401L
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90311-C0023
- Warranty: This genuine Toyota part is covered by warranty.
More Info
Fits the following 2018 Toyota RAV4 Submodels:
- LE, Limited, SE, XLE | 4 Cyl 2.5L | 2ARFE, 2ARFXE; ASA42L-ANTGKA, ASA42L-ANTMKA, ASA42L-ANTSKA, ASA42L-ANTXKA, ASA44L-ANTGKA, ASA44L-ANTMKA, ASA44L-ANTSKA, ASA44L-ANTXKA, AVA44L-ANXGBA, AVA44L-ANXGBK, AVA44L-ANXMBA, AVA44L-ANXMBK, AVA44L-ANXSBA, AVA44L-ANXSBK

2018 Toyota RAV4 Crankshaft Seal

With ToyotaPartsDeal.com, you have access to an extensive inventory of genuine 2018 Toyota RAV4 Crankshaft Seal, all priced competitively. Feel secure in your purchase, as all our OEM 2018 Toyota RAV4 Crankshaft Seal are covered by warranty. Plus, we offer a hassle-free return policy and speedy delivery service.

2018 Toyota RAV4 Crankshaft Seal Parts Questions & Experts Answers

Q:
How to remove and install the front crankshaft seal for the 2018 Toyota RAV4?
Posted by Caesar H.
A:
Remove the crankshaft pulley and note how the seal is installed, ensuring the new one is positioned to the same depth and orientation. Carefully pry the oil seal out of the cover using a seal puller or a large screwdriver, taking care not to damage the crankshaft or distort the cover. To prevent damage, wrap electrician's tape around the screwdriver tip. Apply clean engine oil or multi-purpose grease to the outer edge of the new seal and install it in the cover with the lip facing inward. Drive the seal into place using a seal driver or a large socket and hammer, ensuring it enters the bore squarely and stops at the correct depth. Check the pulley hub surface for grooves caused by long-term contact with the seal; if damaged, replace the pulley. Lubricate the pulley hub with clean engine oil and reinstall the crankshaft pulley. Finally, install and tighten the crankshaft pulley retaining bolt, completing the installation in reverse order of removal.
Answered by Toyota Parts Specialist Dean / Aug 19, 2024