Genuine Toyota Avalon Crankshaft Position Sensor

Toyota Avalon Crankshaft Position Sensor Parts Questions & Answers

• Sensor, Crank Position
  90080-19014
  Q: What is the function and location of the crankshaft position sensor in a Toyota Solara and Toyota Avalon engine?

  A: The crankshaft position sensor (CKP) is responsible for determining the timing of fuel injection and ignition on each cylinder. In four-cylinder models, the sensor is located under the timing belt cover, while in V6 models, it is mounted outside the cover above the crankshaft pulley. To check the sensor, disconnect the electrical connector and use an ohmmeter to probe the terminals. If the test results are correct, there may be an issue with the harness or the PCM, which should be diagnosed if necessary. Removal of the sensor requires removing the timing belt cover on four-cylinder models and the inner fender shield on V6 models, disconnecting the electrical connector, and removing the bolt to detach the sensor. Installation is the reverse of removal.
• Sensor, Crank Position
  90919-A5003
  Q: How do you disconnect the CKP sensor on on Toyota Avalon and Toyota Camry?

  A: To disconnect the CKP sensor, begin by unplugging the cable from the negative battery terminal. The sensor is located on the timing chain cover next to the crankshaft pulley. Then, unplug the electrical connector, and pull out the sensor and harness. Lastly, remove the crankshaft position sensor retaining bolt and sensor. Installation is the reverse of removal, ensuring that the CKP sensor retaining bolt is tightened securely.