Disconnect the wire connected to the negative terminal of battery Put off the anti theft system connected with the stereo if any. Subsequent to this, remove the electrical connectors from the facilitation of the alternator and then release the alternator adjustment and pivot bolts to effectively remove the drivebelt. Bolt, the adjustment one and pivot one can be removed to release the alternator from the engine. If disposing the old alternator, add the new or rebuilt one to guarantee similar terminal number, size, and location, as well as the identification mark as the original product. Know that sometimes even a new or a remanufactured alternator may not come with the pulley, so the pulley might be transferred from the old one; check how this service is performed in the shop. Installation is carried out in a sequence opposite to the removal process; after setting the alternator, adjust the tension of the drivebelt and check the charging voltage to ensure the correct operation of the alternator.