Disconnect the negative battery cable. The air conditioning control panel must be removed before accessing the radio mounting screws. Remove the retaining screws and pull the radio panel outward to access the backside, then disconnect the electrical connectors and the
Antenna lead. Release the clips and separate the radio from the panel, which comes out with this panel and two vents; release the clips top and bottom to remove the radio from the vent panel. Installation is the reverse of removal. Remove the door trim panel; all models have speakers in both front and rear doors, with rear door speakers mounted similarly to the front. Remove the speaker mounting rivets by drilling out the rivets securing the door speaker, then pull the speaker out and disconnect the electrical connector. Installation is the reverse of removal. In addition to the standard door and rear speakers, some models are equipped with small tweeters for improved high-range sound, which are mounted in the front of the doors under the mirror cover. Remove the outside mirror covers, then remove the tweeter mounting nuts and disconnect the electrical connector; the tweeters are the small speakers located behind the outside mirror mounting nut covers and are secured by two of the mirror mounting nuts. Installation is the reverse of removal.