How to Remove and Refit the Brake Light Switch on Toyota Echo?

To remove the brake light switch, start by moving the driver's seat fully to the rear for maximum working space. Disconnect the wiring plug from the brake light switch located at the top of the brake pedal bracket, then loosen the switch locknut and withdraw the switch from the bracket. For refitting, reverse the removal process. After fitting and reconnecting the switch, check its operation by having an assistant observe the brake lights while you push the brake pedal in by hand approximately 5 to 10 mm, adjusting the brake light switch so that the lights just turn off. Release the pedal and slowly press it again to ensure the brake lights illuminate before the pedal has traveled 15 mm. Additionally, the brake light can be adjusted by measuring the clearance between the switch plunger and the top of the pedal, comparing it with the specified measurement.

Genuine Toyota Echo Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
Toyota Echo Stop Lamp Switch Assembly
Part Number: 84340-32050
$31.76 MSRP: $44.39
You Save: $12.63 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy, Stop Lamp; Stoplamp Switch, Switch
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2005 Toyota Echo | 4 Cyl 1.5L | 1NZFE; NCP12L-BDMRKA, NCP12L-BDMRKK, NCP12L-BDPRKA, NCP12L-BDPRKK, NCP12L-BEMRKA, NCP12L-BEMRKK, NCP12L-BEPRKA, NCP12L-BEPRKK, NCP13L-AGMRKK, NCP13L-AGPRKK, NCP13L-AHMRKK, NCP13L-AHPRKK

Toyota Echo Brake Light Switch

Toyota Echo Brake Light Switch is a small electrical component that activates the rear brake lamps once the driver presses the brake pedal to warn traffic that a car is slowing down or halting. The Brake Light Switch is mounted below the dash on a bracket located directly below the brake pedal arm and closes its circuit whenever the pedal is moved such that the arm is in contact with the Brake Light Switch plunger. This mechanical motion creates an electrical circuit that activates the brake lights. As the pedal is released, the arm moves off, the circuit is opened, and the lights are extinguished. The Toyota Echo Brake Light Switch system illuminates instantly without requiring individual manual work, which helps make the road a safer area of communication. The Brake Light Switch is part of the larger lighting network that also controls headlights, turn signals, and parking lights and has the same single function of brake lamp activation. The performance of all Toyota Echoes should be consistent to provide other motorists with clear signals of stopping, which will make Toyota Echo drivers safe in traffic in general.

If you are in demand for superior quality and affordable OEM Toyota Echo Brake Light Switch, then shop with us! We own a wide range of the reduced-priced genuine Toyota Echo Brake Light Switch. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Echo Brake Light Switch Parts Questions & Experts Answers

Stop Lamp Switch Assembly
84340-32050
Q: How to Remove and Refit the Brake Light Switch on Toyota Echo?
A:
To remove the brake light switch, start by moving the driver's seat fully to the rear for maximum working space. Disconnect the wiring plug from the brake light switch located at the top of the brake pedal bracket, then loosen the switch locknut and withdraw the switch from the bracket. For refitting, reverse the removal process. After fitting and reconnecting the switch, check its operation by having an assistant observe the brake lights while you push the brake pedal in by hand approximately 5 to 10 mm, adjusting the brake light switch so that the lights just turn off. Release the pedal and slowly press it again to ensure the brake lights illuminate before the pedal has traveled 15 mm. Additionally, the brake light can be adjusted by measuring the clearance between the switch plunger and the top of the pedal, comparing it with the specified measurement.