How to replace Rack and Pinion Boot on Toyota Echo?

Remove the relevant tie-rod end, then take off the inboard and outboard securing clips before sliding the Rack and Pinion Boot off the end of the tie-rod. Clean the tie-rod thoroughly and slide the new boot into position. Fit the boot securing clips, using new clips if necessary, ensuring that the boot is not twisted. Finally, reattach the tie-rod end.

Genuine Toyota Echo Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Rack and Pinion Boots found

View related parts
Toyota Echo Steering Rack Boot
Part Number: 45535-52060
$15.93 MSRP: $22.27
You Save: $6.34 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot, Steering Rack, NO.2; Boot, Tie Rod Boot
- Manufacturer Note: W(POWER STEERING)
- Warranty: This genuine Toyota part is covered by warranty.
Fits the following Vehicles:
- 2002-2005 Toyota Echo | 4 Cyl 1.5L | 1NZFE; NCP12L-BDMRKA, NCP12L-BDMRKK, NCP12L-BDPRKA, NCP12L-BDPRKK, NCP12L-BEMRKA, NCP12L-BEMRKK, NCP12L-BEPRKA, NCP12L-BEPRKK, NCP13L-AGMRKK, NCP13L-AGPRKK, NCP13L-AHMRKK, NCP13L-AHPRKK
View related parts
Toyota Echo Steering Rack Boot
Part Number: 45535-52030
$29.50 MSRP: $41.23
You Save: $11.73 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot, Steering Rack, NO.2; Boot, Tie Rod Boot
- Manufacturer Note: W(MANUAL STEERING)
- Warranty: This genuine Toyota part is covered by warranty.
Fits the following Vehicles:
- 2000-2005 Toyota Echo | 4 Cyl 1.5L | 1NZFE; NCP12L-BDMRKA, NCP12L-BDMRKK, NCP12L-BDPRKA, NCP12L-BDPRKK, NCP12L-BEMRKA, NCP12L-BEMRKK, NCP12L-BEPRKA, NCP12L-BEPRKK, NCP13L-AGMRKK, NCP13L-AGPRKK, NCP13L-AHMRKK, NCP13L-AHPRKK
View related parts
Toyota Echo Steering Rack Boot
Part Number: 45535-52010
$17.60 MSRP: $24.60
You Save: $7.00 (29%)
Product Specifications
- Other Name: Boot, Steering Rack, NO.1; Boot, Tie Rod Boot
- Manufacturer Note: W(POWER STEERING)
- Warranty: This genuine Toyota part is covered by warranty.
Fits the following Vehicles:
- 2000-2003 Toyota Echo | 4 Cyl 1.5L | 1NZFE; NCP12L-BDMRKA, NCP12L-BDMRKK, NCP12L-BDPRKA, NCP12L-BDPRKK, NCP12L-BEMRKA, NCP12L-BEMRKK, NCP12L-BEPRKA, NCP12L-BEPRKK

Toyota Echo Rack and Pinion Boot

The Toyota Echo Rack and Pinion Boot keeps the steering rack, plus its internal seals, dirt, moisture, and road debris free. It also provides a tight seal at each end of the rack tube. Composed of a flexible rubber that contracts and extends as the tie-rod end moves, the Rack and Pinion Boot prevents contaminants from entering the rack housing to protect the hydraulic or manual gear surfaces and keep them lubricated. The Rack and Pinion Boot in the Toyota Echo prevents particles from reaching the rack piston and O-ring seals, which can result in leaks that cause stiff steering or grinding noise. If the Rack and Pinion Boot is torn, dirt may enter and cause the inner tie-rod joint and sealing faces to wear more quickly, which may result in an expensive rack replacement. Timely inspection and changing of a damaged Rack and Pinion Boot therefore helps ensure smooth, predictable steering operation in the Toyota Echo without making changes to other steering parts. The Toyota Echo steering boot installation will not affect the steering alignment, as fitment matches original equipment dimensions. It installs in grooves on the rack tube and on the tie-rod.

If you are in demand for superior quality and affordable OEM Toyota Echo Rack and Pinion Boot, then shop with us! We own a wide range of the reduced-priced genuine Toyota Echo Rack and Pinion Boot. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Echo Rack and Pinion Boot Parts Questions & Experts Answers

Steering Rack Boot
45535-52060
Q: How to replace Rack and Pinion Boot on Toyota Echo?
A:
Remove the relevant tie-rod end, then take off the inboard and outboard securing clips before sliding the Rack and Pinion Boot off the end of the tie-rod. Clean the tie-rod thoroughly and slide the new boot into position. Fit the boot securing clips, using new clips if necessary, ensuring that the boot is not twisted. Finally, reattach the tie-rod end.