My Garage
My Account
Cart
Genuine Toyota Prius Turn Signal Switch
Turn Signal Indicator Switch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Turn Signal Switches found
Toyota Prius Signal Switch
Part Number: 84329-33080$120.85 MSRP: $171.81You Save: $50.96 (30%)Ships in 1-3 Business Days
Toyota Prius Multi-Function Switch
Part Number: 84329-42010$99.70 MSRP: $140.54You Save: $40.84 (30%)Ships in 1-3 Business Days
Toyota Prius Switch Turn Signal
Part Number: 84329-33120$110.21 MSRP: $155.36You Save: $45.15 (30%)Ships in 1-3 Business Days
Toyota Prius Turn Signal Switch Assembly
Part Number: 84310-47030$249.91 MSRP: $358.35You Save: $108.44 (31%)Ships in 1-3 Business Days
Toyota Prius Turn Signal Switch
By allowing the driver to let others know of any lane change or turn immediately, the Toyota Prius Turn Signal Switch enhances road safety, especially in heavy traffic and low visibility conditions. The Turn Signal Switch is fixed to the steering column and operates as a lever that flips up or down to activate the electric signal that flashes the outside indicators. Dials for the wipers, fog lights, headlights, cruise control and more are housed within the internal contacts of this unit. Thus, it performs many lighting and convenience functions from the single stalk attached to the steering column of the car. Throughout first to current generations, the Prius has maintained a similar design, continuing with a single stalk for this and previous generations instead of separate toggles, allowing a consistent click and self-cancel when the wheel straightens out. Although extra sub switches have been added to the multifunction assembly, these minor evolutions do not appear to be a result of changes to the internal operations of the Turn Signal Switch, which operates using spring-loaded detents and conductive paths. Therefore, the aforementioned Turn Signal Switch will fit into the original steering column of your Toyota Prius that is already in place. Furthermore, the Turn Signal Switch will plug into the factory wiring harness that each Toyota Prius already carries. Finally, picking the right one comes down to the model year and trim of your vehicle.
If you are in demand for superior quality and affordable OEM Toyota Prius Turn Signal Switch, then shop with us! We own a wide range of the reduced-priced genuine Toyota Prius Turn Signal Switch. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.
Toyota Prius Turn Signal Switch Parts Questions & Experts Answers
- Q: How to Remove and Install the Turn Signal Switch on a Toyota Prius?A:Note that this procedure in the following section applies only to the models made 2004 and later. Start by removing the cable on the negative terminal of the auxiliary 12-volt battery, it is advisable to do the initialization process every time the cable is connected. Subsequently, extract the steered and the covers of the steering column as well. Steering column switches comprise one multifunction switch, the switches at both ends of the column, and the airbag clockspring. The wiper switch on the right side is to be unscrewed by its releasing tab by using a screwdriver beside pulling out on the switch. Subsequently, it is necessary to delete the airbag clockspring mechanism. Remove the top of the retaining spring with pliers to pinch and compress it, after that, lift off the combination switch assembly and remove the wiring connection from the switch. Following is the process of removal: Installation is the process of putting it the reverse way.
