How to remove and replace the fuel pressure pulsation damper on Toyota Sequoia and Toyota Tundra?

To remove and replace the Fuel Pump Pulsator, first remove the engine cover and relieve the fuel system pressure. For 1GR-FE models, remove the clip from the Fuel Pump Pulsator and pull it out of the fuel rail. Remove the old O-ring and discard it. Installation is the reverse, using a new O-ring and applying a light coat of oil. For 2UZ-FE models, unscrew the Fuel Pump Pulsator, remove the fuel supply line banjo fitting, and discard the old sealing washers. Installation is the reverse of removal.

Genuine Toyota Sequoia Fuel Pump Pulsator

Fuel Pressure Pulsation Damper Assembly

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

3 Fuel Pump Pulsators found

View related parts
Toyota Sequoia Damper Assy, Fuel Pressure Pulsation
Part Number: 23270-50010
- Replaced by: 23270-50012
$98.22 MSRP: $138.46
You Save: $40.24 (30%)

Add to Cart
More Info
Fits the following Vehicles:
2001-2010 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA, UCK60L-GKALKA, UCK60L-GKASKA, UCK65L-GKALKA, UCK65L-GKASKA
Less Info
View related parts
Toyota Sequoia DAMPER Assembly, Fuel Pr
Part Number: 23270-38020
- Other Name: Damper Assy, Fuel Pressure Pulsation
- Replaced by: 23270-38021
$98.22 MSRP: $138.46
You Save: $40.24 (30%)

Add to Cart
More Info
Fits the following Vehicles:
2008-2013 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 5.7L | 3URFBE; 3URFBE; USK65L-GKTLGA, USK65L-GKTSGA, USK65L-GKTZGA
Less Info
View related parts
Toyota Sequoia DAMPER Assembly, Fuel Pr
Part Number: 23270-38021
- Other Name: Damper Assy, Fuel Pressure Pulsation; Damper
- Replaces: 23270-38020
$98.22 MSRP: $138.46
You Save: $40.24 (30%)

Add to Cart
More Info
Fits the following Vehicles:
2008-2018 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 5.7L | 3URFBE; 3URFBE; USK65L-GKTLGA, USK65L-GKTSGA, USK65L-GKTZGA
Less Info

Toyota Sequoia Fuel Pump Pulsator Parts Questions & Answers

Damper Assy, Fuel Pressure Pulsation
23270-50010
Q: How to remove and replace the fuel pressure pulsation damper on Toyota Sequoia and Toyota Tundra?
A: To remove and replace the Fuel Pump Pulsator, first remove the engine cover and relieve the fuel system pressure. For 1GR-FE models, remove the clip from the Fuel Pump Pulsator and pull it out of the Fuel Rail. Remove the old O-ring and discard it. Installation is the reverse, using a new O-ring and applying a light coat of oil. For 2UZ-FE models, unscrew the Fuel Pump Pulsator, remove the fuel supply line banjo fitting, and discard the old sealing washers. Installation is the reverse of removal.