Genuine Toyota Sienna Fuel Filter

Gas Filter

Enter your vehicle info to find more parts and verify fitment

  • Select Vehicle by VIN
  • Select Vehicle by Model
Select by VIN
Enter your VIN for the most accurate results.
Enter your VIN for the most accurate results.
or
Select by Model
-- Select Make --
-- Select Model --
-- Select Year --

4 Fuel Filters found

  • Toyota Sienna Fuel Filter - 23300-74280
    View related parts

    Toyota Sienna Fuel Filter(For Fuel Tank)

    Part Number: 23300-74280
    • Other Name: Filter, Fuel(For Fuel Tank); Filter, Fuel Filter
    • Comment: (FOR FUEL TANK)
    $26.42 MSRP: $36.92
    You Save: $10.50 (29%)
    Add to Cart
    More Info
    Fits the following Vehicles:
    • 1998-2001 Toyota Sienna | CE, LE | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCL10L-GFSDKA, MCL10L-GFSDKK, MCL10L-GFSGKA, MCL10L-GFSGKK, MCL10L-PFSDKA, MCL10L-PFSDKK, MCL10L-PFSGKA, MCL10L-PFSGKK, MCL10L-SESDKA, MCL10L-SESDKK
    Less Info
  • Toyota Sienna Fuel Filter - 23300-0D010
    View related parts

    Toyota Sienna Fuel Filter(For Fuel Tank)

    Part Number: 23300-0D010
    • Other Name: Filter, Fuel(For Fuel Tank); Fuel Filter
    • Comment: (FOR FUEL TANK)
    $35.38 MSRP: $49.46
    You Save: $14.08 (29%)
    Add to Cart
    More Info
    Fits the following Vehicles:
    • 2000-2003 Toyota Sienna | CE, LE | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCL10L-GFSDKA, MCL10L-GFSDKK, MCL10L-GFSGKA, MCL10L-GFSGKK, MCL10L-PFSDKA, MCL10L-PFSDKK, MCL10L-PFSGKA, MCL10L-PFSGKK, MCL10L-SESDKA, MCL10L-SESDKK
    Less Info
  • Toyota Sienna Fuel Filter - 23217-03030
    View related parts

    Toyota Sienna Fuel Filter Pump

    Part Number: 23217-03030
    • Other Name: Filter, Fuel Pump
    • Manufacturer Note: TYPE A:REFER TO ILLUSTRATION
    • Replaced by: 23217-0F010
    $11.45 MSRP: $16.00
    You Save: $4.55 (29%)
    Add to Cart
    More Info
    Fits the following Vehicles:
    • 1998-2003 Toyota Sienna | CE, LE | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCL10L-GFSDKA, MCL10L-GFSDKK, MCL10L-GFSGKA, MCL10L-GFSGKK, MCL10L-PFSDKA, MCL10L-PFSDKK, MCL10L-PFSGKA, MCL10L-PFSGKK, MCL10L-SESDKA, MCL10L-SESDKK
    Less Info
  • Toyota Sienna Fuel Filter - 23300-29065
    View related parts

    Toyota Sienna Fuel Filter(For Efi)

    Part Number: 23300-29065
    • Other Name: Filter, Fuel(For Efi); Fuel Filter
    • Comment: (FOR EFI)
    $29.74 MSRP: $41.57
    You Save: $11.83 (29%)
    Add to Cart
    More Info
    Fits the following Vehicles:
    • 1998-2001 Toyota Sienna | CE, LE | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCL10L-GFSDKA, MCL10L-GFSDKK, MCL10L-GFSGKA, MCL10L-GFSGKK, MCL10L-PFSDKA, MCL10L-PFSDKK, MCL10L-PFSGKA, MCL10L-PFSGKK, MCL10L-SESDKA, MCL10L-SESDKK
    Less Info

Toyota Sienna Fuel Filter Parts Questions & Answers

  • Q: How to replace the Fuel Filter?
    A: Relieve the fuel system pressure. Note: 2001 and later models do not have a separate serviceable fuel filter. These models have a filter in the fuel tank which is designed to last for 100,000 miles or more. Disconnect the negative battery cable. If necessary for access, remove the air cleaner assembly and evaporative canister. Unscrew the banjo bolt from the top of the filter and disconnect the fitting from the filter. Disconnect the fuel line fitting at the top and bottom of the fuel filter (1998 through 2000 models only). Loosen the fitting at the bottom of the fuel filter with a flare nut wrench while holding the filter canister from turning with an open-end wrench. Remove the bracket bolts from the inner fender panel and remove the filter and bracket assembly. Note that the inlet and outlet pipes are clearly labeled on their respective ends of the filter and that the flanged end of the filter faces down. Make sure the new filter is installed so that it's facing the proper direction as noted above. When correctly installed, the filter should be fitted so that the outlet faces up and the inlet faces down. Connect the inlet fitting to the bottom of the filter, then mount the bracket to the inner fender panel, tightening the bolts securely. Now tighten the inlet fitting securely. Connect the outlet fitting to the top of the filter, using new sealing washers on either side of the fitting. Tighten the banjo bolt to the torque. The remainder of installation is the reverse of the removal procedure.

Related Toyota Sienna Parts

About Toyota Sienna Fuel Filter

Everything installed in your Toyota Sienna vehicle needs to be kept in good working condition. The online catalog we provide will get you through the ordering process safely and securely. All genuine Toyota Fuel Filter from us are shipped directly from authorized Toyota Dealer. If you want search for Sienna Fuel Filter fast and easily, we assure you that you get to opt for one in less the time.