My Garage
My Account
Cart
Genuine Toyota Sienna Throttle Position Sensor
TPS Switch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Throttle Position Sensor found
Toyota Sienna Sensor, Throttle Position
Part Number: 89452-06020$71.97 MSRP: $101.44You Save: $29.47 (30%)Ships in 1-3 Business Days
Toyota Sienna Throttle Position Sensor
If you are in demand for superior quality and affordable OEM Toyota Sienna Throttle Position Sensor, then shop with us! We own a wide range of the reduced-priced genuine Toyota Sienna Throttle Position Sensor. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.
Toyota Sienna Throttle Position Sensor Parts Questions & Experts Answers
- Q: How to replace the Throttle Position Sensor on Toyota Sienna?A:The Throttle Position Sensor TPS was integrated into the throttle body in the 2007 and following models and consequently should the TPS fail then the throttle body would require replacement. h, The TPS is located on the end of the throttle shaft on the throttle body and the PCM can measure its output voltage to regulate fuel delivery in proportion to the driver's demand as indicated by the throttle valve angle. A bad or poorly grounded TPS can cause surges of fuel from the injectors and poor idle as the PCM may misread changes in the throttle. Problems with the TPS circuits will set a diagnostic trouble code. For this, ensure that the ignition key is off, and remove the electrical connector in contact with the TPS, unscrew and loosen the TPS screws fixed on the throttle body and then remove the TPS. reinstallation is the process of putting back again equipment, and just as much as the process of removal has steps, installation has the steps in the opposite order.
